Johnson Controls T-3610-1001 Pneumatic Low Limit Controller, 0-25 psi

DUCT STAT-8' AVERAGE ELEMENT

Two independent circuits each with both positive and negative outputs. Blown fuses are not provided for by the controller. LEDs indicate circuit status, Pressure setting, Filter Sets/Ducts selected. Wall-Mount bracket included.

This Johnson Controls Pneumatic Low Limit Controller easily mounts on a wall and features a 4-20mA dc output. This controller is ideal for controlling damper and fan control and includes over and under pressure settings as well as adjustable modulation.

The Pneumatic Low Limit Controller is provided with 2 quick connect ports rated to 100 PSIG. The use of the pneumatic tubing system eliminates the need for electrical wiring for this controller. Accompanying hoses are included to connect to device, electrical shut-off valve (T3610-1005), and discharge port (T3646) or heat call/fan control (T3663) .

This control is designed to control the flow of gas to gas heaters in commercial and industrial buildings. This control is designed with pneumatic switching action, dual display scales (psi & Venturis), extended operational range (0-25 psi), indicating pilot valve, adjustable low limit value, and selectable high limit value.

This controller is an essential component for centrally operated air conditioning and building automation systems. It is used to provide a controlled pressure which is then used for the control of HVAC equipment such as exhaust dampers, air balancing devices, heat exchangers, cooling towers, and cooling coils.

The Johnson Control T-3610-1010 Pneumatic Low Limit Control is a HVAC system Pneumatic Control. It can be used to control temperature in heating and cooling systems, air handlers, air conditioning systems, heat pumps and other suitable applications.

Now you can control accurately the speed of your blower or fan with this Pneumatic Low Pressure Controller. You control the pressure by means of a slide valve. The wide pressure regulator dial makes setting it fast and easy, and precise gauge gives accurate readings at all times.

The Control Valves T-3610-1001 and T-3610-1002 are normally closed solenoid pressure regulators. They maintain a preset pressure in the range of 0 to 25 psig, and deliver flow rates from 8gpm to 125gpm. To order, please specify plug position as N or T, and tube size as 1/4" or 3/8". Listed below is a selection of Control Valve accessories to assist in the proper handling of Control Valves.

The T3610-1001 is a pneumatic low limit controller that can be used on single stage, multi-stage, low temperature and modulating applications. This controller limits the position of the actuator available with Johnson Controls Actuators or it can be used on high ambient or low temperature servo valve applications.

This Johnson Controls T-3610-1001 Pneumatic Low Limit Controller, 0-25 psi is an economical solution for controlling pneumatic pressure that applies to heating and/or cooling systems in residential buildings. The T-3610-1001 comes pre-assembled with an adjustable low limit control, junction box, 1/2" PVC tubing, mounting bracket, and electrical cord. Also available are other models including the Master Control T-3600 series and Direct Mount Pneumatic Controllers PVCS12 series.

The Johnson Controls T-3610-1001 Pneumatic Low Limit Controller, 0-25 psi (15-150 kPa) is a direct acting, spring wound pneumatic actuator for control of low pressure air. It is designed for back-up protection of controls and equipment in the event of failure of prime air supply and/or to protect operators and equipment against dangerous overpressures. It has an Adjustable analog output (adjusts over pressure to rated relief pressure) and gives the ability to limit the maximum airflow delivered during periods of normal flow demand.

The Johnson Controls T-3610-1001 Pneumatic Low Limit Controller, 0-25 psi is a pneumatic low limit controller that is used to reduce the use of hot water. This pneumatic controller is helpful in modulating existing equipment to shorten recovery time, increase hot water use efficiency and helps modulate existing equipment to maintain desired temperature. Made up of brass and stainless steel material, this product is manufactured by Johnson Controls.