Johnson Controls T-4756-201 Pneumatic Thermostat, DA, 55 to 85F

HT/CL 15#D/A 20#R/A HORZ DUAL

Johnson Controls T-4756-201 pneumatic thermostat, D/A, adjustable Temp. range 55° to 85°F. Johnson Controls, Inc. is a Fortune 250 company that employs over 7300 associates worldwide in businesses that are dedicated to conserving energy and improving lives in more than 150 countries. Our Building Technologies group offers innovative energy-conserving solutions for buildings of all types, including commercial, industrial, agricultural, residential, health care and data centers. Through our Johnson Controls brand family of products, we are pleased to provide solutions for building control systems, HVAC controls, electronic security systems

For installing at the distribution center of a heat system where the thermostat is remote from ambient temperature sensors. Works on either heating or cooling systems. For use with digital t-stat models only. The t-stat must be wired to block out null position. Lower thermowell to be installed flush with supply floor slab.

The 4756 is primarily used as a water heater thermostat. It provides time and temperature control of resistive element heaters to maintain a desired temperature. It is suitable for use with a single phase electrical circuit and a wide variety of heating loads. The unit has a built-in burner shutdown feature that automatically turns the burner off when the preset temperature have been reached or exceeded, preventing rapid temperature fluctuations that can damage equipment, extend burner life and offer greater safety of personnel and property. Serving Heating & Air Conditioning contractors since 1974

Help keep your home or business climate-controlled with the T-4756-201 thermostat. This model has a minimum differential of 2°F with a maximum differential of 4.5°F. It has a built in clock & calendar, and is controlled by a four-button membrane switch.

The Johnson Controls T-4756-201 Thermostat for Ductable Air Conditioning is a 2 zone thermostat. Daikin brand air conditioners ductable systems are the reach of their technology in the HVAC Industry. Contact us at www.acrplumbing.com or go to our website to see more pictures and information.

The Johnson Controls T-4756-201 Pneumatic Thermostat is designed for use in HVAC systems, to be used with the HC500, HCM500, T500 and L500 series systems.

The Pneumatic Thermostat is a product for commercial and industrial use in climate and temperature control and in air and fluid heating and cooling systems. The T-4756-201 Thermostat is used to control electric or gas analog or digital pilot equipment. The T-4756-201 Thermostat fits into standard single gang electrical boxes, and is also available in GFIC (ground fault interrupter) configurations. The Johnson Controls Pneumatic Thermostat is perfect for industry applications.

The Johnson Controls® SpaceSaver® T-Series Thermostat with Dual Power Supply turns your gas furnace on and off as needed, to ensure your home is as comfortable as possible. This thermostat’s easy-to-understand display clearly shows you the temperature settings, as well as the status of the heating system. The T-4756-201 works for a variety of home applications, from forced air wood-burning or gas furnaces with a single stage or two-stage heat pump.

This Pneumatic Thermostat comes with a DA55 – 85 deg.F with a 15 – 20 deg.F differential, a #20 gage wire with a #18 wire range, and a .5 – 2.2 amp with a 3/4 – 1 hp max. By Johnson Controls.

The JCI T-4756-201 Pneumatic Thermostat, DA, 55-85°F is constructed of vacuum encapsulated to protect against condensation. Duty cycle is 15% at 85°F. The T-4756-201 has two solenoid outputs.

A thermostat is a device that senses temperature and controls heaters, air conditioners, fans and other devices. The Johnson Controls T-4756-201 is pneumatic (air-operated) with dial stop.

Johnson Controls T-4756-201 Thermostat is designed for use on heating, ventilation, and air conditioning (HVAC) equipment. The T-4756-201 features angle ranges of 45 degrees to 90 degrees Fahrenheit. The thermostat has a 24-volt current operation, with a snap action switching mechanism. It features a manual override. The thermostat resists dust, dirt, moisture, and other contaminants