Johnson Controls TE-635GM-1 Temperature Sensor, Platinum 1k ohm

"1K Ohm 4"" Duct Temp. Sensor"

The TE-635GM-1 Platinum Temperature Sensor from Johnson Controls is a platinum 1000 ohm thermistor for 1"" (25 mm) diameter ducts. The sensor provides temperature information to building control systems and includes a built-in calibration table for easy installation and setup. This sensor is designed to be used with the TCM2830, TCM2831, TCM2832, and TCM2833 transducers.

Johnson Controls TE-635GM-1 Temperature Sensor, Platinum 1k ohm in an Aluminum Enclosure. The TE-635GM-1 is an absolute temperature sensor for air conditions applications featuring a platinum RTD and aluminum enclosure.

Perfect for use in air ducts and heating, ventilation, and air conditioning (HVAC) systems. High temperature 4"" platinum resistance wire encapsulated in molded silicone rubber. Temperature range is 45-280 degrees F.

The TE-635GM-1 Platinum Sensor is a high accuracy, platinum RTD temperature sensor used to accurately measure ambient temperature. The sensor has a nominal resistance of 1k ohm, a range of -55 to 125°C (-67 to +257°F), and an accuracy of ±0.5°C (±0.9°F) over the entire range. The sensor is enclosed in a 316L stainless steel case with threaded ends and includes matching nuts, washers, and gaskets for easy mounting directly on the wall or ceiling.

This temperature sensor is designed for use with the Johnson Controls TE-635 series thermostat, and is made in the USA. It is a positive-off temperature sensor which will open when the duct temperature exceeds 58 degrees celcius.

The Johnson Controls TE-635GM-1 Platinum 1K Ohm Temperature Sensor is a Non-Contact, Non-Dispersive Thermometer (NDTD) sensor. The TE-635GM-1 has four duct probe assemblies that can be rotated 90 degrees. This allows the installer to place the TE-635 in either vertical or horizontal position. The platinum resistance thermometer provides non contact temperature measurements without any maintenance costs to the end user and is resistant to corrosion and rusting.

NTC Thermistor, Platinum, 1K Ohm, 4""

This TE-635GM-1 Platinum 1k ohm temperature sensor is ideal for measuring high duct temperature and accurately determining when to turn your heating or cooling system on or off. Sensors are an important component of any HVAC control system, as they provide the communication between the control board and the airflow system. Durable and easy to install, this product is exactly what you need for maintaining optimal comfort in your home or business.