Johnson Controls V47AB-2 "1/2""TEMP.REG.VALVE 75/135F" "1/2""TEMP.REG.VALVE 75/135F"

"1/2""TEMP.REG.VALVE 75/135F"

With greater durability and reliability, Johnson Controls Commercial V47AB-2 "1/2""TEMP.REG.VALVE 75/135F" has been added in this updated catalog. This commercial valve is of excellent quality and condition, an elite value for your money. It provides outstanding performance in the field of commercial plumbing products.

Johnson Controls V47AB-2 "1/2""TEMP.REG.VALVE 75/135F" is a temperature control valve, Johnson Controls part number V47AB-2, is a temperature control valve. Both of the temperature digits of the temperature control valve are doing a fine job together, they were made to measure temperature controlling, they keep accurate temperature of the water. Both of the temperature digits have a very important function. The 2nd digit tells you if it is working right, just by looking at it from the outside of the thermostatic valve body.

The Johnson Controls V47AB-2, 2"" x 3"" Manual Valve, Series F is designed for the reliable performance of the A/C system, in residential and commercial structures. It consists of single port valve body with manually operated ball-in-seat poppet type valve in A/C refrigerant circuit. "1/2""TEMP.REG.VALVE 75/135F"

Efficiently controls comfort level in outdoor environments, where both temperature and humidity fluctuate. The V47AB-2 is a "1/2""TEMP.REG.VALVE 75/135F" that can produce from 75 to 135 PSI and has a minimum flow of 100 SCFM at a pressure drop of 0.5" WG at 75 PSI and a 5:1 ratio.

The Johnson Controls V47AB-2 "1/2""TEMP. REG. VALVE 75/135F" is manufactured by Johnson Controls Inc. (JCI) and was added in Feb 2015 to the product database. The " V47AB-2 1/2""TEMP. REG. VALVE 75/135F " has the Air Conditioning, Heating & Cooling family.

Johnson Controls Series TEMP.REG.VALVE 75/135F

The Johnson Controls® 1/2" Valve is for light commercial air conditioners, electric furnaces, split system air conditioners, and radiant floor heating. It is used on single zone systems operating at over 75°F or 135°F set point temperatures.

The controls combine shell and tube design with a balanced port arrangement for the most efficient flow of cold water through the core of the exchanger under any hot/cold system operating condition using clean, potable water. A complete line of 1/2" and 3/4" valves, fittings and other accessories are standard

Features: 1/2" Square Port, Brass Ball Valves, To 37.9 psi Pressure/Tight Fit Gasket, 316 Stainless Steel Ball, Coil Actuator, "D" Handle Design, 3/8"-16 NPT Inlet, 3/8"-16 NPT Outlet.

The V47AB series of temperature regulators includes two-stage, solid-state electronic temperature control valve. This process control valve is designed to accommodate vented or unvented applications with an input temperature range of 64°F-150°F. The compact electronically controlled valve is internally mounted for ease of installation and glandless. The compensated diaphragm design provides positive on/off control, enabling the use of a knife switch, push to trip or limit switch for logic operation. The unit provides safe shutdown by sensing heating or cooling downstream pressure allowing the equipment shutdown to avoid thermal damage of the load.

Contactor, thermostat temperature adjustable, copper coils, steel case

Littelfuse Inc. E350G3H, 120V/60Hz 2-wire Grounding Resistor