24V ELEC ACT 0-10VDC PROP.90#
The Johnson Controls VA-7152-1001 proportional actuator is CSA certified and meets UL requirements. It has a torque of 90 in/lbs, voltage of 24vDC, an operating force of 0-10VDC, and is actuator only.
The Johnson Controls VA-7152-1001 Proportional Actuator, 90 Torque is designed for use in a variety of HVAC applications. It is 90 torque, weighs .09 lb, and has an on voltage of 0 to 10 VDC. This actuator is a replacement for discontinued part VA-7152-0008.
Part Number: VA-7152-1001, Johnson Controls, Proportional Actuator. Designed to meet the fast and repeat actuation needed for many HVAC applications. The actuator is wired with a 0-10 VDC signal. This high torque unit can be used with either a long or short shank mounting bracket. Dimensions: 4 7/8"L x 2 3/16"W x 1 5/8"H.
The Johnson Controls VA-7152-1001 Proportional Actuator, 90 Torque is a 24V proporation actuator with 90 torque. Its voltage is 24 volts.
The VA-7152-1001 is a normally closed proportional control device that provides a DC output voltage proportional to the input voltage. With 90 in-lbs of twist torque and an input range of 0 to 10 volts DC, the VA-7152-1001 can be used in many different applications. Of course, your original Johnson controller may not last forever, and sometimes its replacement will only offer standard voltage control once again. When you need to replace a Proportional Actuator, count on Johnson Controls.
The JCI VA-7152-1001 Proportional Actuator, 90 Torque has been engineered to provide smooth motion for a 24V actuator. The product is designed with Teflon coated stainless steel ball bearings and a thin film composite cover. The reusable thermoplastic elastomeric seals in this device are made from low durometer material that will not distort at high temperatures.
The Johnson Controls VA-7152-1001 Proportional Actuator is a 24V DC electric proportional actuator with 90% torque at 0.5 inch stroke, T15/75 connectors, and mounting hardware included.