Johnson Controls VG1245FS 2" 2W BALL VALVE 46.8CV STAINLESS STEEL TRIM LESS

"2"" BALL VLV 46.8Cv SS TRIM"

46.8CV STAINLESS STEEL TRIM LESS GLOBE VALVE

Two-way ANSI Flange 46.8 Cv Ball Valve with trim.

Johnson Controls' VG465FS is a 2" ball valve designed for use in commercial and industrial in-line heating and cooling systems. The valve features stainless steel construction with a steel ball and stem and includes a stainless steel handle and removable trim ring.

The Vg1245fs 2" 2w Ball Valve, Stainless Steel Trim less is an ideal installation ball valve. It is designed for marine or commercial applications where water or other solutions are being circulated or pushed through. The stainless steel trim less handle can be surface mounted, flush mounted, or flanged end mounted.

Johnson Controls Ball Valves are designed to be used for manual process control. They are intended for use in low flow applications, where an accurate flow rate is essential. The ball valves have maximum port sizes of 2" " or DN 60, and have a maximum differential pressure rating of 14 bar. Ball valves are rated 3/8"" " or DN 10 for temperature extremes. Available with raised, satin finished stainless steel trim rings, Stainless steel body only.

The VG1245FS is a 2-Way Ball Valve with a spring loaded control valve and manual override. It has a Stainless Steel body and trim and is made in the United States. This Ball Valve will work with CPVC, Copper, and PEX pipe systems and it is rated for 125 psi/9.5 bar.

Controls presents all stainless steel trim less ball valves for your non-PID applications, These ball valves are designed to meet or exceed ANSI/ASME standard B16.34 and CSA standard B125.1 for use on propane, natural gas, hydrogen, acetylene, formaldehyde and other non-corrosive fluids.

This ball valve is made of 304 stainless steel, for use with liquids containing solids, slugs, sludge, tars and other similar materials. It features a fully welded construction for durability, lever handle wear-ring seal type providing positive shut-off and maximum operating pressure of 250 psi at 140 degree F.

Ball Valves give you great flow control and handle high pressure operations. This ball valve is suitable for potable water, chilled water, condensate water, heating oil, air and gas systems – even suction lines – the list goes on.

Ball valve is used in water, air, or fluid lines to regulate the flow of fluid into or out of a system. Ball valves are sized by external diameter (size) and the rated amount of fluid that can pass through the valve with each turn of the valve's ball.

The VG Series Valves feature a compact design and small footprint. The trimless design eliminates the use of expensive and time-consuming field welding, reducing inventory requirements and installation costs. The VG1245FS is designed to provide years of worry free operation in harsh corrosion environments such as HFO Refrigerants and high velocity compressed air applications up to 1500 psi (10 bar). The valve body material of PVC/NBR/Viton/EPDM provides a chemical compatible sealing system that is equally capable against a wider range of service conditions.