Johnson Controls WEL11A-601R Well Remote Bulb 2 3/8 in Insertion 1/2 MPT W/phenolic Bushing 0.096 In

"1/2""Well .299""ID 2-3/8""long"

The Johnson Controls WEL11A-60B Well Bulb Insertion 1/2 MPT W/phenolic Bushing 0.096 In 1/2""Well .299""ID 2-3/8""long Well insert, for various water valves. Well adapters, or well inserts are used to connect the push in type male x 1/2"" BSPT plugs to at well's female threads. Many commercial water shutoffs use this design, while residential valves may use a gasket and an adapter for this purpose."

The Johnson Controls WEL11A-601R is a .299"ID, 2-3/8"long, 0.096'' bushing, 12V DC, 3W, single contact resistive wire well adapter with phenolic bushing. This insert goes into the "well" board used in some models of mercury vapor ballasts with 3/4"shafts.

The Well Bulb 2 3/8" Insertion 1/2" MPT is a well bulb with a flange and bushing used to direct water from a surface-mounted spigot to a below-ground storage tank, allowing the spigot to remain above ground. This well bulb can be installed into a standard well or into a corrosion-resistant portable well. It is made of zinc.

The Johnson Controls Bulb Insertion Adapter is designed to fit into the Well MPT Socket. This bulb insertion adapter is 2-3/8 inch long and has a phenolic bushing for water tight connections to threaded well connections.

For Well lighting applications requiring a bulb into a well. Comes standard with a phenolic bushing and a removable tab style base to ensure a tight fit.

Select the right size bulb for your well. Use this insert and extension to install your new lighting system and make sure it fits in your well.

The industry standard in well pump protection. The Well Plug protects against freezing, poor water quality, pump failure, and overflow conditions in your well system.

The Well® remote device control system is an easy to install, reliable solution available in multiple models to fit virtually any occupancy or application requirement. The devices are now even more compact, versatile and offer an additional receptacle option to allow plug-in of standard 3-way switches.

Put power in the palm of your hand. Well Remote is easy to operate, cost-effective, and multi-functional. Operates both on/off and dim functions for almost any 120-volt AC appliance or electronic device that connects via a standard lamp cord. Bright LED indicator lights show status. Non-metallic housing withstands corrosives, salt water and electrical interference. Non-corrosive steel screws are included for quick operation on non-metallic surfaces. Works with most standard 120V light bulbs or nightlights.

Easy Installation

Turn On and Off circuits and lights without leaving the convenience of your home. The remote control hand held transmitter can be conveniently placed at a distance from the wall switch while wiring is concealed within conduit or pipe to provide a clean uncluttered installation.