Johnson Controls Y65G13-0 Johnson 40va transformer 24VAC primary foot mounting

24V-24V ISOLATION 40VA FOOT MT

The Y65G13-0 Johnson 40VA transformer 24VAC primary foot mounting has a high energy efficiency, and a height of 3.34 inches for use in closets and other small spaces.

Y65G13-0 Johnson 40va transformer 24VAC primary foot mounting Y65G13-0 is used for general purpose devices ranging from lights to power tools, this transformer features a copper tube BOPP core, nickel clad steel EI secondary/LOT primary windings and a FIPS approved combination AC main and aux. switch

40VA, 24V nominal isolation transformer. Alternative power sources provide the facility to monitor power consumption and allow control of electrical devices when utility power is unavailable. Transformer accepts input voltages of either 115 or 230 VAC nominal with output voltage of 24 VAC. 40VA output provides power for a variety of electronic devices including some vending machines and refrigerator/freezers. Case houses common form C contacts for easy wiring connections

A regulatory 40V, 40VA isolation transformer that allows operation of fluorescent lighting or any enclosed fan, motor, or connected lighting loads up to 1.4A at 24VAC or below from a primary voltage up to 277 VAC with an unregulated output voltage range from 19.5V to 27.0V DC at 50% load. It has a primary 4 wire lead configuration and standard 2 wire line cord rated for 125/250 VAC 60Hz/30A. The transformer has an Al panel mounting base(1) and 60-240VA rating with a max VA/Watt rating of 40VA/

The Johnson Controls Y65G13-0 is a 40VA low voltage transformer that provides isolation for sensitive audio systems or sophisticated computer systems. This transformer is UL listed, which assures the quality of the product. Also, when this transformer was created, safety was a major priority. Manufacturers are required to adhere to stringent safety requirements including proper insulation to prevent shock and disconnect devices activated by over-currents or over-temperature.

The Y65G13-0 is a 40VA, 24 VAC primary voltage isolation transformer. This control transformer features a thermal overload protector to prevent overheating. The open frame construction allows for ease of assembly and maintenance. This controller is intended for use with indoor phase control lighting ballasts only.

The Y65G13-0 is a 120/240 VAC, 40 VA transformer packaged in standard wire connections. the XLPE insulation on primary wires is laminated around axis; secondary windings are encapsulated for wiring protection.