Kele Product UCP-422 4/20maTo3/15psiTransducer

4/20maTo3/15psiTransducer

4/20maTo3/15psiTransducer

The Kele UCP-422 4/20maTo3/15psiTransducer is a transducer designed to provide accurate and reliable measurement of pressure, force and strain. This product can be used in a variety of applications such as construction, agriculture, and environmental applications. Differential pressure measurement is easily accomplished with the built-in differential pressure port that has been included at no additional cost!

The UCP-422 4/20maTo3/15psiTransducer is high accuracy, low cost pressure transducer designed for use with a wide variety of process gases. It has a hermetic, stainless steel housing and a surface mount lead frame that provides for easy installation in corrosive or harsh environments. The UCP-422 includes all the required factory installed terminations and has an input circuit which accepts 4 to 20 mA inputs and provides the output voltage necessary to drive other microprocessors or digital logic circuits.

The Kele Product UCP-422 4/20maTo3/15psiTransducer is a highly accurate, pressure transducer with a maximum measurement of 3 bar. It has a minimum operating temperature of -40°C and maximum operating temperature of 70°C. This transducer is perfect for determining why the pressure in your hydraulic system has gone down. The transducer will tell you exactly how much air has seeped into your system as well as when you need to get it fixed.

The UCP-422 is a 4/20ma to 3/15psi Transducer that delivers outstanding performance, reliability, and value. It includes a 20mm (0.79”) diameter sensing element, 20mm stainless steel housing, and a 3 meter (9.8”) cable.

The UCP-422 4/20maTo3/15psiTransducer converts 4/20mA signals to 3/15psi outputs and vice versa. This transducer is ideal for sensing pressure, level, flow and temperature. It has a built in resolution of 0.1% of full scale with an accuracy of ±0.02% FS from 10 to 85°C (50 to 185°F).

The UCP-422 4/20maTo3/15psiTransducer is recommended for use with a pressure range of 0 to 15 psig, with a frequency range of 1.0 to 3.0 MHz and provides an output voltage proportional to the pressure applied. The transducer contains a stainless steel case and is available in a variety of configurations.

Whether you're a hobbyist or professional, Neuco's UCP-422 4/20maTo3/15psiTransducer is an economical choice for your performance needs. This product will keep up with even the most demanding applications and can be used either wet or dry. It's designed to withstand extreme conditions, which means it will last for years to come.

The UCP-422 4/20maTo3/15psi Transducer is a non-contacting output transducer in the 422 Series of U Series Pressure Transducers. It provides high resolution pressure measurements for laboratory and industrial applications. This product provides a full-scale pressure range of 4-20 mA and a full-scale differential pressure range of 3 to 15 psi (0.21 to 1.03 bar).

4/20maTo3/15psiTransducer

4/20maTo3/15psiTransducer

The Kele UCP-422 4/20maTo3/15psiTransducer is a transducer designed to provide accurate and reliable measurement of pressure, force and strain. This product can be used in a variety of applications such as construction, agriculture, and environmental applications. Differential pressure measurement is easily accomplished with the built-in differential pressure port that has been included at no additional cost!

The UCP-422 4/20maTo3/15psiTransducer is high accuracy, low cost pressure transducer designed for use with a wide variety of process gases. It has a hermetic, stainless steel housing and a surface mount lead frame that provides for easy installation in corrosive or harsh environments. The UCP-422 includes all the required factory installed terminations and has an input circuit which accepts 4 to 20 mA inputs and provides the output voltage necessary to drive other microprocessors or digital logic circuits.

The Kele Product UCP-422 4/20maTo3/15psiTransducer is a highly accurate, pressure transducer with a maximum measurement of 3 bar. It has a minimum operating temperature of -40°C and maximum operating temperature of 70°C. This transducer is perfect for determining why the pressure in your hydraulic system has gone down. The transducer will tell you exactly how much air has seeped into your system as well as when you need to get it fixed.

The UCP-422 is a 4/20ma to 3/15psi Transducer that delivers outstanding performance, reliability, and value. It includes a 20mm (0.79”) diameter sensing element, 20mm stainless steel housing, and a 3 meter (9.8”) cable.

The UCP-422 4/20maTo3/15psiTransducer converts 4/20mA signals to 3/15psi outputs and vice versa. This transducer is ideal for sensing pressure, level, flow and temperature. It has a built in resolution of 0.1% of full scale with an accuracy of ±0.02% FS from 10 to 85°C (50 to 185°F).

The UCP-422 4/20maTo3/15psiTransducer is recommended for use with a pressure range of 0 to 15 psig, with a frequency range of 1.0 to 3.0 MHz and provides an output voltage proportional to the pressure applied. The transducer contains a stainless steel case and is available in a variety of configurations.

Whether you're a hobbyist or professional, Neuco's UCP-422 4/20maTo3/15psiTransducer is an economical choice for your performance needs. This product will keep up with even the most demanding applications and can be used either wet or dry. It's designed to withstand extreme conditions, which means it will last for years to come.

The UCP-422 4/20maTo3/15psi Transducer is a non-contacting output transducer in the 422 Series of U Series Pressure Transducers. It provides high resolution pressure measurements for laboratory and industrial applications. This product provides a full-scale pressure range of 4-20 mA and a full-scale differential pressure range of 3 to 15 psi (0.21 to 1.03 bar).