Mityvac MIT822647 Venturi Kit for MV7300

KIT, VENTURI

Mityvac Kit, Venturi, For Use w/Mityvac Series 7100 & Series 7200

The Venturi Kit allows for boost pressure in the form of a high velocity "vacuum" to help eliminate troublesome vacuum leaks. The negative pressure in the manifold of the vacuum pump creates suction to pull other engine components towards it, creating over-pressure in these components.

The Venturi kit for MV7300 includes a Venturi vacuum pump that can easily suck air from a tank or other container through tubing several feet long with minimal effort. The kit includes a 1/4 in. ID x 5 ft. transparent hose, 10 ft. of 1/4 in. ID x 3/16 in. I.D. professional grade medical rubber tubing and two capped lid adapters to fit popular containers such as our pneumatic or hydraulic hand pump hoses, the MV

This is the venturi kit for use with the MityVac® MV7300 FAST Air Pump. Includes 2 stainless steel adapters, 0-4/0-7 NPT.

Mityvac Venturi kit for MV7300 1/4?NPT (Both 3358 and 3449 models).

Coverts air to a precise amount of vacuum for maximum efficiency when charging your MityVac gauge. Reduce wasted time and money spent on pumping the unit as often and get the most out of each charge. Kit contains: Venturi Tube, Measuring Cup, Air Injection Hose

The Kit allows MCV7000 Series bench-top pumps to operate at a continuous flow rate of 11.0 lpm. For use as a safety precaution, the kit includes an emergency shut-off switch with its own circuit breaker Three indicators on the switch perform as follows: When the switch is off, a warning light will glow to indicate the emergency mode; when a vacuum has been attained or if the pressure differential across the venturi reaches 5 psi (34 kPa), both warning lights will