Lamb L-116765-13 MOTOR, 5.7" 120 VOLT B/B 3 STAGE TANGENTIAL BYPASS

MOTOR, 5.7" 120 VOLT B/B 3 STAGE TANGENTIAL BYPASS

LAMB MOTOR, 5.7" 120 VOLT B/B 3 STAGE TANGENTIAL BYPASS, 1/4 HP, 1 Phase, 1460 RPM, 55C Ambient Temp Rating, 115/230 VAC Shaft Dia. (in.) 5/8 .

The L-118561-13 is a brushless electronically commutated motor that is used for HVAC and refrigeration applications. This 5.7" 120 volt B/B 3 stage tangential bypass motor has an open/close selector switch for speed selection making it ideal for variable applications.

The L116765-13 5.7" 120 Volt B/B 3-Stage Tangential Bypass is suited for simple atmospheric drying applications where the diameter of the blower wheel can be reduced in size in order to increase airflow. This motor is suitable for use in dryer applications with a maximum 60-1/2" inch (152 cm) diameter blower wheel.

Versatile and efficient, the Motor, 5.7" 120 Volt, 3 Stage Tangential Bypass is designed for exhaust fan application, but can be used for many other small motors. This fan can be installed in a side or backdraft applications, with or without ducting and will enhance system operation. The five-bladed motor operates in a counter-clockwise rotation and can also be used as piping fan for applications where clean air is needed to make sure that gases or liquids do not come in contact with combustible surfaces.

LAMB FURNACE MOTOR- 5.7" 120 VOLT, 3 STAGE

Set of 3, 163mm. high x 118mm. wide x 100mm. deep, 120 Volt single phase fan motor with internal thermal overload protection. 3 stage, tangential bypass with 0% 60% 100% on off settings and manual reset thermal overload reset button

The L-116765-13 is a 3 Stage Input 120V 1/8 HP 50/60Hz B14 Grounded Outlet. It has a shaft with keyway, cooling fan, and tangential bypass for high efficiency operation and long life.