LENNOX 12J16 Sequencer

Sequencer

Sequencer wall control for installed Lennox 12J16 or 14J21 packaged rooftop units.

The 12J16 Lennox Sequencer provides single space heating and cooling system with a wall mounted slide out thermostat. It includes a 12k BTU heater and a 12k BTU/h air conditioner unit with a programmable thermostat.

The LENNOX 12J16-32IG is a 405 volt, 208/230 volt single phase solid state Intellisense® Sequencer with built-in current transformers and two optional Input Modules. It is equipped with Momentary Reset push buttons which provide a visual indicator of sequencer operation. It accepts 6 inputs for adjustable times on Override and Standby positions that can be set to up to 60 seconds in 0.5 second increments. The 12J16-32IG activates each position in sequence from 1 through 6, then repeats the cycle.

The Lennox® Sequencer® combined with the Thermostat and Electronic Air Cleaner is a complete system that provides precise temperature control, two stage cooling

The LENNOX 12J16 SEQUENCER is a unique box control system that, once programmed, allows you to control and operate heat by room and zone. A Sequencer is installed on each zone branch circuit. The thermostat measures the actual room temperature in each zone at the thermostat device. The Sequencer only turns on the heat when each individual zone reaches the comfort setting for a given time period. This allows for different temperature settings to be used in different rooms and allows you to save on energy costs.

The Lennox 12J16 Sequencer lets you set the heating schedule on your HVAC to automatically adjust up and down at set times. For example, when you're away, the temperature in your home won't drop below a certain point.

Maximizing the comfort and energy efficiency of your Lennox central air conditioning system has never been easier with this 12J16 self-contained sequencer. Self-contained designs allow you to install them without requiring a separate input from the thermostat or a common control wire.