Lennox 26W45 "Pressure Switch 2-Stg.90/1.50"""

"Pressure Switch 2-Stg.90/1.50"""

Lennox X14C451 "Pressure Switch 2-Stg.90/1.50"""

The Lennox 26W45 Pressure Switch 2-Stg.90/1.50""" is used to operate the air conditioner compressor in both cooling and heating operations and to protect the air conditioner against excessive system pressures which may result from leaks or faulty installation. This unit can also be used as an auto-changeover switch for larger, two stage units capable of operating in either a cooling or heating mode of operation.

The 26W45 Pressure Switch 2-Stg.90/1.50"" is designed for the Lennox XC21 and XCG25 furnaces and the Lennox XL16 Humidifier. Replace your worn out or broken pressure switch to ensure reliable performance and maximum energy efficiency from your furnace.

The Lennox brand 2-Stg.90/1.50 HP CB260004X01 Pressure Switch 90/1.50 Reg LP Gas Logs can be used with a variety of models of Lennox gas logs and with LP gas furnaces that are branded as American Standard, Armstrong, Bradford White, Cozy, Comfort Maker/Rheem/Ruud, Cragg or Goodman.

The 26W45 Pressure Switch is used for all 2-Stage 90/1.50 furnaces with (Lennox T87) second stage motor. This pressure switch is a direct replacement for the part numbers shown below. If you have any questions about the part you are purchasing, our experienced customer service representatives can help you find the right Lennox part to fit your needs."

The 2-Stage 90/1.50-Inch Ducted High Efficiency Furnace, for Low to Medium BTU Output, is suitable for single and two-stage cooling to replace existing equipment. This unit features a Swing Motor design so it will fit inside of the plenum box with swing motors installed in either the cold air return or supply. The two-stage furnaces have either 3/8 Inch or 1/2 Inch gas capacity, and this furnace is equipped with a Low Voltage Control Board so that the furnace can be wired directly to 24 Volt AC power instead of 230 Volt AC power or

Switch pressure switch is designed for direct connection to 2-stage 90%/50% compressors. Kit includes two switches, level sensing tube, and pressure tubing.