LENNOX 28M89 - OEM Replacement Furnace Blower Motor 1/3 HP 115 Volt

1/3HP 115V 1Ph Blower Motor

The Lennox 28M89 Blower Motor is a Standard 115V 1Ph 1/3HP replacement blower motor.

The Lennox 28M89 is a 1/3 HP 115V Blower Motor which can replace the following: American Standard 1U1361-35; ARIENS 515100319; Fedders A2612-F1; Fedders A2760-F1; Fedders A2900-F1; Fedders A3002-F1; Fedders A3002-F2; Fedders A3002-F3; Fedders A3011S1; Jestek 57310930000; Rheem RHB100CA

The Lennox 28M89 blower motor is a 1/3 horsepower 115 volt, 1 phase blower motor. It was designed to replace the following older models of furnace blower motor: Lennox - 78M8022-018 and 78M8029-025, 2G800060-Y1; Janitrol - 4792017, 4806017, 4904018 and 4907014; Airide/Aircoa - 28R4096, 28R4005; Intertherm/Airex - 1394717 and 1391093; Carrier - 6V48981;

Replace your old and inefficient blower motor with this 1/3 hp 115 volt Lennox blower motor. It's a direct replacement for the OEM and is available from

Our 28M89 model blower motor has been used by official Lennox Dealers for replacement, and often for sloped ceiling installation. We have already replaced thousands of these units, and this is the best quality replacement blower motor on the market. The 28M89 used in tandem with an M90 Blower wheel, or a PX0571AB blower wheel.

The Lennox 28M89 3-speed blower motor for direct mount.

Features a permanently lubricated ball bearing motor that has no lubrication requirements. The motor is vibration isolated from the mounting structure. It has a heavy-duty ceramic shaft, and includes thermal overload protection and electrical/ terminal connections. NOTE: Must provide mounting screws or bolt sizes when ordering replacement blower motor. M4-1.5 x 12mm screws are required for installation, but not supplied with the motor.