LENNOX 42J32 - OEM Replacement Furnace Transformer 120 Volt Primary / 24 Volt Secondary

120V->24V 40VA Trnsfmr L/Fuse

Lennox® OEM replacement 42J32 furnace transformer is 120 volt primary and 24 volt secondary. This furnace transformer provides 40 VA at 24 volts. Replacement Instructions: 1. Power off thermostat, unplug power cord to ensure power off. 2. Remove wires from old transformer and install on the new one by following same wire connection sequence 3. Reverse the removal procedure for the old flame sensor and install the new one in reverse.

Replacement for Lennox G13JV-04. Specifications: 120V/24V 40VA, Length: 24", 1" Diameter, 15/16" Lugs, Fits Heights of 47"-63"

The Lennox 42J32 furnace transformer is designed as a direct replacement for the replacement of the following Lennox Furnace models: AAANA096AAA Lennox 66AAP050A2A Lennox 77 ________________________________________________________________________ NOTE: This transformer should not be used if the furnace has a secondary transformer rated at more than 40VA. It should only be used as a replacement to the existing 40VA secondary transformers.

The Lennox 42J32 OEM replacement furnace transformer is a 40VA transformer that is used with the Lennox XB95 Zone Ductless systems and also works as a replacement for the Lennox 42JC22H.

Lennox 42J32-24 Transformer (24 Volt) is used in the Lennox brand / Coleman brand furnaces. It outputs 24 volts. Lennox FAQs on this product: https://support.lennex.com/ase/supportapp?target=FAQ&filter=%2Fhome_1.1%2F&userroleid=20201

This Lennox 42J32A1 transformer is an OEM replacement from the Lennox brand, and has a 120v ONLY primary winding. It is recommended that you use one of these with a 24v secondary for more power.

When you are on the search for a Lennox 42J32 OEM replacement or a low cost same part number furnace transformer, Delta Controls is an excellent choice. Our harnesses have proven to be reliable replacements to the more expensive Lennox OEM product.