Lennox 51M75 95-125F AUTO Limit Switch 95-125F AUTO Limit Switch

95-125F AUTO Limit Switch

95-125F AUTO Limit Switch

The Lennox 95-125F AUTO Limit Switch is used for a cooling control. The 95-125F AUTO Limit Switch is used on cool only systems and have programmable feedback.

This limit switch is designed to limit the operation of a HSC tube furnace in the event of an overtemperature condition. The 95-125F AUTO Limit Switch model is especially designed for use in combination with a 95-125F Temp Sensor .

The Lennox 51M75 95-125F AUTO Limit Switch is just one of the many quality products we offer

The model 51M75 is a 95-225F Limit Switch. This device is offered for use on gas heaters in a vertical mounting configuration. This unit features adjustable limits that are factory set at 100, 150 and 200F via an inferior accessible adjustment screw.

The 51M75 two-stage gas valve complies with the new requirements set forth by the California Energy Commission's Appliance Standards Program (CEC-100) for 95ºF and 125ºF venting for gas radiant floor heating systems. The default position of the 51M75 is set to 95ºF. This means only direct venting systems are allowed on single stage furnaces. The 51M75 AUTO Limit Switch permits both direct and 90ºC indirect venting systems. With a maximum amp draw of 20 amps, this limit switch will work on any zone or sectional valve that runs off an

Lennox AUTO Limit Switches are used in all residential forced-air heating and cooling systems. They save energy by automatically turning off the air conditioner or furnace when the desired temperature level has been reached.