Lennox 56L68 K20 BlowerRelay 24v SPDT K20 BlowerRelay 24v SPDT

K20 BlowerRelay 24v SPDT

BlowerRelay 24v SPDT

The K20 Relay is a 24 Volt SPDT relay used to control and operate high-speed blowers. It is located on the GE Refrigerant Lineset in the Air Handler assembly. The K20 Relay has a coil bushing connection, which accepts up to 4 poles. The terminal connections are: #4 - Red wire (24 VAC) #5 - Black wire (24 VAC) #6 - Yellow wire (24 VAC) #7 - White wire(

The K20 Blower Relay is designed to protect the blower motor for motors that have low amp draw. The relay has a SPDT form factor with 24 VDC coil voltage. It has a .25" male quick disconnect to install into a K-Slot or wire directly into the conduit."

The 24-volt K20 Blower Relay allows up to 6 standard coils to be wired in parallel. This relay is designed to work with accessories that draw power from your furnace control board.

The Lennox K20 Blower Relay operates two speed blower motors on your Lennox Industries air conditioning system. The K20 features improved durability, resistance to moisture and thermal shock, and direct plug-in harness connection.

The K20 relay is a SPDT ON-ON-On DC relay that has terminals #1 & #3 tinned for wire bonding Conforms to UL585B 3rd Edition, CSA C22.2 NO 18 Product Condition: New *** BNIB. This product was returned as it was damaged upon arrival or shipped with missing parts. It was never used and returned in original factory packaging.

Relay 24V SPDT with 3 Positions or 2 Positions is an AC voltage operated device in which the load is controlled by changing its internal resistance. In case of no AC voltage applied to any position, each position indicates that the relay is off and the load current does not flow through it, then the load of this position is not supported. When AC voltage is supplied to one position or more, all three positions indicate that the relay is on and the load current flows through it. Electrical