LENNOX 58C97 - Aftermarket Furnace Sequenser Sequencer Timer Relay Switch 24 Volt Coil

SPST HEAT SEQ RELAY

Features: Lennox 58C97 Aftermarket Furnace Sequenser Sequencer Timer Relay SPST HEAT SEQ RELAY 24 Volt Coil

The Lennox 58C97 HEAT SEQ RELAY is a replacement for - 58C96 58C99 58945 58946. This relay is made for horizontal furnace applications with or without heat strips and can be replaced with a 24 volt 1 phase coil.

This ELECTRIC HEAT SEQUENCE relay works with a 24 Volt coil. Pins are wired as follows;

This is a Brand new aftermarket Lennox furnace sequencer/relay switch that your furnace may need. A faulty sequencer can cause your furnace not to operate properly or not at all. On occasion you may have no heat on a random setting. The relay consists of 3 parts: the coil, the bar and the timer (with normally open microswitch). The coil gets power from 24V AC from line side of the furnace circuit board. When current flows through the coil's winding, it closes a magnetic field around the bar, causing it to pivot, which opens and closes an internal switch in the timer. The

When your furnace's 24VAC relay requires replacement the 58C97 will serve as a good aftermarket alternative for your furnace. This sequencer features a 24VAC coil with an operating temperature of -40 degrees to 175 degrees F and measures 3.5 inches wide by 1.8 inches high by 2 inches deep.

The 58C97 Sequencer Relay Functions:

The 58C97 is a high quality sequenser equipment timer used as part of the Lennox air conditioner and heat pump that enables the system to run on call for heating and cooling. If your system requires a 24 volt coil this sequenser is compatible with all 24v coils.