Lennox 60J28 FLAME SENSOR LEAD FLAME SENSOR LEAD

FLAME SENSOR LEAD

Put your mind at ease with the Flame Sensor Lead from Lennox. This is designed for use with the Ashrae 32 and 15 industrial furnace vents, and it must be replaced every 3 to 5 years in order to keep working properly.

Control the temperature of your gas furnace with the Flame Sensor Lead from Lennox. 1/8" x 8' Flame Sensor Lead is suitable for use with Electronic Ignition (EI) and Solid-State Ignition (SSI) furnaces. Flame Sensor Lead is compatible with infrared sensors and can be used with both Series 60 and J-Series furnaces. It features a stainless steel outer casing to resist corrosion. Flame Sensor Lead is protected by a 90-day warranty from Lennox.

The Flame Sensor Lead is a 16 Foot Lead for the Lennox flame sensors.

Flame Sensor Lead for the Lennox 30KA21, 30KA27, & 30KA29, and others. The lead will attach to the Flame Sensor terminal on the board.

The Lennox Flame Sensor Lead is 3/8 Inch x 100Inch and is designed for use with any Lennox Pulse-Width Modulation (PWM) or Variable-Frequency Drive (VFD) furnace.

The flame sensor lead for the Lennox air conditioning and heat pump unit includes two sets of terminals: one sprinkler port and three temperature port. The lead attaches to the flame sensor wire in the terminal block on the furnace or air handler.

This flame sensor lead replaces the mounting bracket on the flame sensor board for Lennox furnace models 60J28, 60J40 and 60J51. Attaches to the flame sensor board and wires into the modular circuit board.