Lennox 60M13 Float Switch 220f 150psig 25va

Float Switch 220f 150psig 25va

The Lennox Float Switch 220f 150psig 25va installed in your boiler, air conditioning, or hydronic heating system is the most vital part of your equipment. This float switch contains a magnet that activates the mechanical actuator of your equipment when the liquid level rises to a certain point.

Featuring a compact design, the Lennox® 60M13 float switch is ideal for use in small commercial and industrial residential HVAC systems. Featuring stainless steel construction, this float switch has a trip point of 150 psig (1050 kPa) and a maximum working pressure of 350 psig (2450 kPa). A temperature rating of 220 F (104 C) provides flexibility when selecting an appropriate float switch. Mounting screws and hardware are included in the box.

This Lennox Float Switch comes with 25 VAC, 25 VA rating and a temperature range of 0-220 degrees F. It has a 2-Pole, 3-wire system. The exterior is brass while the interior is aluminum.

This Lennox Residential Indoor Air Comfort Control Thermostat is a prime selection of Lennox Residential Systems. It comes in the following features: 1,0-1-2.2vac/dc, thermistor circuit/eletrical, exclusive sustem diagnostics, Efcaviation control output (eco), gold contacts, silver cad low voltage conductivity switch and float limited to 25 vdc, pressure switch 25 - 150 psig. This unit is housed in an epoxy filled plastic enclosure with stainless steel hardware.

The Lennox 60M13 float switch is an energy transfer and standby relief device that controls the operation of the boiler.

This 230v float switch is the heart of any boiler automatic control system. It's designed for use with the following boilers: 80L-230V with a temperature range of 70-90 deg. Celsius, 100L 230V with temperature range of 60-70 deg. Celsius and 150L 230V with temperature range of 60-80 deg. Celsius

A float switch is designed to detect the level of liquid in a tank. It does this by using an "inertia switch" that has a magnet attached to the side of the float. The idea behind these products is that they detect when something (the magnet) is no longer moving on the side of the float. Basically, as soon as you stop moving, it activates.