Lennox 71W29 COLLECTOR GASKET

COLLECTOR GASKET

Lennox 71W29 COLLECTOR GASKET is designed to gently filter and remove airborne pollutants from the A/C system, simply replace it every three to five years.

The Lennox Collector Gasket is a rectangular duct gasket designed for use in a duct system with up to 5.4 in. (139 mm) clearance between the supply and return registers. The Collector Gasket is designed to be used in conjunction with the flange and airfoil fin assembly

The Lennox Collector Gasket is a 21.0" x 17.0" x 1.0" gasket used on the underside of the glass pane of an air conditioner's collector box or housing unit, and on the top surface of the air conditioner casing, forming a seal to keep conditioned air inside the unit.

The Gaskets used in the Collector and other Gas Furnaces are made to fit only those models. If you are not sure if this is the correct replacement, we offer a Gasket Identification Guide with pictures that you can view at www.lennoxmfg.com/gasket_guide

Lennox 71W29 gasket collector, used on all 5 & 6 series

Low-profile gas heaters with limited space need a gasket that effectively seals the top of the furnace opening. The Collector Gasket is used on these types of furnaces.

The Lennox 71W29 Gas furnace. 03-04-035-011 collector gasket.