HONEYWELL LP916A1134 LP916A1134 TWO-PIPE D.A. PNEUMATIC TEMP SENSOR

TWO-PIPE D.A. PNEUMATIC TEMP SENSOR

Simple to install and monitor, the NEW Honeywell LP916A1134 Two-Pipe D.A. Pneumatic Temp Sensor operates on two-wire loop systems with a minimum of two simultaneous inputs to sense both air and water temperatures safely and accurately. The sensor features a unique 360 degree view that eliminates the need for additional external angle adaptors.

The Honeywell Lp916A1134 Lp916A1134 Two-Pipe D.A. Pneumatic Temp Sensor is designed to monitor temperature over a wide range in commercial, industrial, and consumer settings. It monitors pressure as well as temperature, ensuring proper operation and functioning within specific parameters. Pressure range: 0 to 600 inches of mercury. Accuracy: +/-1% of indicated value from 0 to 60% of scale, +/-2% of indicated value greater than 60%. For temperatures below the freezing point (32 degrees Fahrenheit), or above 150 degrees Fahrenheit, accuracy may be significantly affected.

The LP916A1134 two pipe D.A. pneumatic temp sensor is designed to be used with a variety of Honeywell controls, including: T87CMF-5100 and T87C-5100 Series, T87CMF5004/T87CMF5104 Series and T87CMF-4004/T87C-4004 Series, The LP916A1134 is NPA approved

Honeywell's two-pipe D.A. pneumatic temperature sensor combines part number LP916A1134-F/R to sense and signal a wide variety of fluid temperatures in the same line. The sensor features K Type sensing elements with a 1:2 ratio for superior accuracy and 0 deg C to 150 deg C sensing range which is continuously adjustable.

The two-pipe D.A. pneumatic temperature sensor may be used in conjunction with a manometer to measure pressure differences within a direct acting pump. The sensor is used in applications in which close control of temperature is not required or is not practical, such as pilot protection on pumps, power centers, valves and other plant equipment.

Honeywell's Two-Pipe D.A. (direct-acting) Temp sensor features an open drain and is often used in combination with a control valve in a refrigeration system...

Protect your investment with a Honeywell LP916A1134 two-pipe D.A. sensor with a pipe thread of 3/8" NPT and electrical thread of 6-32AN. The sensor features a 100F to 120F operating temperature range and delivers 12 volts of power. It is designed for alarm systems, ovens, and storage rooms.