Honeywell 11256 , Inc. Remote Bulb Temperature Controller, Direct Acting, 50 to 150F.

PNEUMATIC REMOTE BULB SENSOR FOR DU

This Pneumatic Remote Bulb Sensor for Du Series Fans can be used to measure and adjust the temperature of the air passing through a duct. The unit is set up by fastening the supplied sensor to the duct using the bracket provided in the kit. The sensor then senses the temperature of air passing over it.

This DuPont Pneumatic Remote Bulb Temperature Sensor is a direct acting and is used with an electronic controller in heating, ventilation and air conditioning systems.

The 11256 is a miniature pneumatic remote bulb temperature controller that converts line voltage to a stable 0.5-1.0psi for controlling hot cathode lamp temperatures. The unique sensor/controller construction uses an all-in-one adapter for easy installation and adjustment of the target point temperature. The Dial Style Controller has a large heat-sensing bellows with small dead band which can be easily calibrated by means of internal adjustments. The wide temperature range compensates for variations in lamp filament temperature.

Control temperatures easily with this remote bulb temperature sensor. Designed for use with electric baseboard heaters, it has a maximum operating temperature of 150°F so you can be sure it will work for your needs.

The Honeywell 11256A1005-U Inc. Remote Bulb Temperature Controller is a direct acting remote bulb sensor with a an on/off control response. It can measure temperatures between 50 and 150 degrees F, and ranges from 90 to 180 degrees C. The temperature controller can be used on gas, oil, or solid fuel-fired central fireplaces with ordinary venting type gas, oil or solid fuel-fired space heating burners. This home accessory is easy to set up and use with no outside wiring required.

… This Honeywell remote bulb temperature controller senses air temperature at the outlet of the sensor target. The sensing bulb has a 316 stainless steel sheath, a 3/8 in inner diameter and a length of 36 inches.

The Honeywell 11256 Remote Bulb Temperature Controller has a maximum load of 1000W. The Honeywell 11256 Remote Bulb Temperature Controller is for use with pilot lights on heating appliances. This product uses heat to transfer energy into a space via the remote bulb sensor. Controlling ambient temperatures has never been easier. The Honeywell 11256 Remote Bulb Temperature Controller operates within 50 to 150 degrees Fahrenheit and comes equipped with two pre-set temperature settings that make corresponding adjustments to the device; this ensures the perfect temperature inside your location every time. The Honeywell 11256 Remote Bulb Temperature Controller by Honeywell has a maximum