JOHNSON CONTROLS M9108-GGA-2 M9108-GGA-2 MOTOR ACTUATOR; 70IN-LB/8NM; 0-10 VDC;

MOTOR ACTUATOR; 70IN-LB/8NM; 0-10 VDC;

A MOTOR ACTUATOR; 70IN-LB/8NM; 0-10 VDC; 0-10 VDC, 70 IN LB, 8 NM

Motor Actuator; 0-10 VDC; 70in-lb/8Nm; Case Length (In.)7.13; Depth (In.)7.13; Height (In.)7.13; Width (In.)7.13; Actuator Style1Cylinder with Cable; Phase1; External Actuation Method...

The M9108-GGA-2 stepper motor actuator (70 in-lb/8 Nm; 0 to 10 VDC) from Johnson Controls is a three-phase brushless step and direction controller designed for industrial control. The high performance device can achieve 5000 rpm and an acceleration rate of 5,000 steps per minute (steps / sec), and it uses a 1/4 hp (hp) stepper motor.

A great product/service uses language that embodies the benefits the customer will gain from the specific features of the product. The words chosen draw mental images of what the user will experience when they employ the product. For example, instead of stating, “The 70 inch-pound motor actuator has a zero to ten volt DC output signal,” consider changing that sentence to:

The Johnson Controls M9108-GGA-2 motor actuator is a compact 2-port actuator, using a fully solid state design. The M9108-GGA-2 accepts 0 to 10 V dc control input, and drives directly without gearboxes.

Johnson Controls introduces through its line of Metal Oxide Semiconductor (MOS) over-current protection devices the M9108-GGA-2 Motor Actuator. This product is produced in accordance with the requirements of MIL-PRF-38535. This rugged actuator is designed to offer quick response at high loads and the ability to withstand harsh environments. Built with an all metal construction, this actuator will withstand shock including drops, bumps and drops.

This Johnson Controls M9108-GGA-2 Motor Actuator creates a strong magnetic field that attracts soft iron or steel plates to cause rotation of the attached rotor. They are typically used with an open loop ELC analog drive, but may also use a closed loop drive.

A motor actuator is an electric device that converts electrical energy into mechanical movement. Manufactured with quality materials, these actuators are built to last.

The M9108-GGA2 is a single-phase, continuous output, low voltage motor actuator built with a compact design to fit various application requirements. The external control box complies with industry standard DNP 3.0.4.134-2013 Capabilities Class B.

A motor actuator is a device that converts electrical energy into linear motion. It will operate an external mechanical device, such as a valve or pump. The Johnson Controls M9108-GGA2 Motor Actuator is commonly used in HVAC applications.

Provides remote mounting capabilities for heating, cooling, and process control applications. Actuators are available in corrosion-resistant, powder coating paintable steel with Bellville washers. Sensors are capable of safe operation when liquids are present. Users can rely on their actuators to provide long life of reliable, accurate performance that meets or exceeds original equipment specifications.

This accessible, durable three-speed switch provides reliable power control when or where you need it, with no user adjustments required. This pump has a maximum flow rate of 22 GPM. With an inlet size of 1