Johnson Controls 8233 M9116-AGD-2 24V 140in# 135ohmFeedbck OnOFF

MOTOR ACTUATOR; 140 IN-LB/16NM; ON/OFF;

The 8233 Motor Actuator is a 2.0 in. by 2.00 in. actuator with a 140 in-lb spring return and 0.59 in minimum travel distance. The 140 in-lb torque capability is covered in a standard 11 in by 14 in package with a minimum profile of only 3 in with a full operating range of 5 in from the mounting surface. The 24 volt variable speed motor drives the M9116 Actuator to move from an off position to position stop, output shaft rotation of up to 25 degrees per second is available with extended lag time required to reach maximum speed for fast

Johnson Controls 8233 M9116-AGD-2 24V 140in# 135ohmFeedbck OnOFF MOTOR ACTUATOR. # OF PHASES: 3; VOLTAGE RANGE, AC: 12V DC; ON/OFF FEEDBACK SIGNAL CONNECTION TYPE: SCREW TERMINALS, THREADED CLAMP TERMINALS, OR WIRE LEADS

This Johnson Controls 8233 M9116-AGD-2 24V 140in# 135ohmFeedbck OnOFF Motor Actuator is manufactured by Johnson Controls to fit their building systems. Customize your system easily with the right control for your specific application .

A magnetic sensor provides a continuous flow of process data that can be used to capture output states and fault conditions. This ON/OFF actuator delivers a medium force output up to 140 in.-lbs. 725 watts...

This motor actuator is suitable for non-positioning applications including HVAC, escalators, elevators, industrial conveyors, automotive window lifting or closing, and many others that have limited space available. Meets most industry standards.

The 8233 M9116-AGD series is a perfectly matched 140#, 135ohm feed back electromechanical torque/position transducer packaged for direct mounting to an AC or DC motor and provides true and accurate feedback and control to the motor driver through a stand-alone I 2 C interface.

This 2-Wire 24 VDC motor actuator is designed to work with the 24 VDC C25NC compressors.

Our M9116 “Ecomate” series of actuators is a high performance motor actuator that has been specifically engineered for energy efficient evaporative air cooling systems. This new family of DC motor actuators offer a unique combination of integration ease and application flexibility while still providing superior performance.

A Motor Actuator that is controllable by an electrical signal.

This heavy duty line voltage control feedbck control is for use on welders, klokers, large engine controls, HO/N toothed gearboxes, various freezer applications, etc.

The M9116-AGD Series is a DC servo motor that provides On/Off (non-locking) control. The M9116-AGD Series does not provide feedback to the control circuit.

The Johnson Controls 9100 Series HVAC Control Boards are used with the Johnson Controls Night Watchman Power Series Thermostats. The M9116 control board consist of a power strip with four overloads, one pump disable circuit, and the following outputs: