24Vac 150lb-in 60sec MODULATING ACT
The new M9184A1019 24VAC 150LB-IN 60SEC MODULATING ACT is a variable torque, solid-state AC servo motor. It features a heavy construction with a 16-gauge steel housing and high-temperature insulation rated for short-time operation to 500degF (260degC). Enhanced with the latest microprocessor technology, this motor provides a fast closed loop current mode .
The Honeywell 2315M9184 24VAC 60 sec MODULATING ACTUATOR is a part of a system that provides a totally proven motorized air valve solution. The valve adjusts at a set Point to either fully open or fully closed. The unit consists of an actuator or servo, a controller and a power supply.
The Honeywell M9184A1019 is a 24 VAC, 150 lb-in. motor drives in 60 sec. The motor is designed to Modulate and reverse rotation to provide push -pull motion from a single 4-wire output. The customizable Maximum Speed Rotation (MSR) feature provides convenient, cost-effective set up and calibration of both the direction and speed of an AC induction motor. The adjustable decay timer allows control of the operating time for special applications. This unit comes with a vibration isolated Mounting Base , power supply, wire harness and NEMA 1 enclosure
The heart of the HONEYWELL SERVO™ Series, this High Torque, coreless motor delivers up to 150 lb-in (20 Nm) of peak torque at a 60 sec/60 deg~120 deg acceleration rate. The external rotor design is highly efficient and offers additional mounting options. This motor comes in both 24Vdc and 120Vac models, allowing use with standard or dual voltage input power supplies
The Honeywell 2315M9184A1019 Adj Attenuator is a 24-volt air conditioned propane motor for 60-second modulating controllers (Lennox or other manufacturer) used in rooftop and wall mount applications. This motor is UL and CSA listed, and meets NFPA documentation requirements.
The Honeywell 2315 Series Semiautomatic Proportional thermostats are designed to control heat within a process. The design can be used for temperature control applications. The product features MODULATING ACTUATOR-RESISTANCE (MARS) which ensures fast overshoot recovery. The long STAY ON TIME provides steady temperature control.
Just one of many in the M9184A Series, The Honeywell 2315 is a DIN-rail mountable, PUSH-PULL Actuator with secondary Relay. The Proportion Mode control can be energized by pushing the actuator in or pulling the actuator out. Proportion mode will allow for precise control and repeatability of closed loop actuators. When wired to a resistive load, the resistance will shift proportional to the position of the push/pull control. The resistance value is displayed on the show circuit VAR-SIG meter and can be read directly from the Honeywell
Free Shipping
In stock
