Honeywell 12383 M9184F1034 24vAdjT & S 2sw TappedShaft NSR 24vAdjT & S 2sw TappedShaft NSR

24V MODULATING ACTUATOR W/2 AUX. SW

This 24v AC MODULATING ACTUATOR W/2 AUX. SWITCH is a 24v AC 0-1/4F MODULATING ACTUATOR W/2 AUX. SWITCH with a tapped shaft. The 200 position actuator has field adjust (New Version) and overload protection. Modulating actuators are designed for proportional control of pneumatic valves in processes that require timely and accurate response.

The Honeywell 24V ACTUATOR, MODULATING, W/2 AUX. SWITCH, 2SPEED (TAPPEDSHAFT), 24 VDC, 4 WATTS comes in a sealed unit construction type. It has a voltage requirement of 24V DC and a current rating of 4A at 0.1In. This shaft actuator is designed to be installed in a 6 inch square or round duct. It includes the following features and accessories: housing style of HYPACK-2; port size of 1 x 1/4 Inch; actuator length of 9 inches; overall stroke

The Honeywell TE124C4HJ100 24V Modulating Actuator with 2 Auxiliary Switches is designed for use with 4-wire control system applications. When connected directly or indirectly to a 0-10V DC variable voltage signal, this actuator will provide solid state position control, without any moving parts. The Actuator features an exceptionally fast response time and can be easily mounted to flat surfaces using the flange mount design.

The M9184F-1034 is a 24 VAC, continuous rated, modulating actuator with a tapped shaft and two auxiliary switches. This package also includes an operating mode switch. It has the same features as the standard M9184F series (except tap-on/tap-off), but includes external adjustment of line current and other features to meet specific application requirements. It will accept both mechanical and magnetic output positioners.

The Honeywell 24 VAC Modulating Actuator features a 2-Position auxiliary switch for use with solid-state or non-solid state equipment.

Modulating Actuator with Auxiliary Switch in a Nema 4x package. Sealed, oil immersed motor. 24 VDC, 90 VA, 15 amp with 1/2 and 1/4 taps on Tapped Shaft.

The M9184F, powered by an external 24 VDC power source, is a compact actuator with the ability to modulate (position or displacement) as well as limit position. It utilizes an external 24VDC supply with a built-in push to trip switch for infinite movement capability. It has a stroke length of 1.5" to 10" and a maximum travel speed of 0.33 in/sec.