TJERNLUND 64676 MAC4E Multiple Appliance Control for Draft Inducers

24V OR 120V MULTIPLE APPLIANCE CONT

TJERNLUND MAC4E Multiple Appliance Control for Draft Inducers - 24V OR 120V

TJERNLUND 94523 MULTIPLE APPLIANCE CONTROLLER WITH 3-TERMINAL BLOCK

The MAC4E is a 24-volt, 4-relay Multiple Appliance Power Module designed to control the power to up to four separate 120 volt AC devices from a single point. The relays are wired in parallel and replace the existing re...

The TJERNLUND MAC4E multiple appliance control for draft inducer motor is used to operate a fan coil of up to 5.5 kW (7.0 kW in 24 V version) and to control the connected evaporator heat pump, indoor fan coil, floor heating circuits, ceiling heating circuits, independent drain pan heaters and external room temperature sensors. The MAC4E control unit replaces legacy controls and makes it possible to utilize all features of ZARGES products inside a grid-tied or off-grid system.

The MAC4E Multiple Appliance Control is used in conjunction with a Draft Inducer Unit, and can control from one to four appliances. The MAC4E can be used to provide convenience and comfort where only one appliance is allowed on a circuit, such as an oven or downdraft exhaust fans.

Slam shut drawers and cabinets, turn on lights, air conditioners, or pool pumps. Control up to 4 appliances by connecting multiple switches to 1 control center (up to 5 amps per switch). Safety features include optional (R) relay, easy installation and mounting with flexible conduit.

The complete line of TJechnlund Manual Damper Controls are designed for automatic ventilation control in fireplace and wood furnaces. Model Mac4E is designed to operate one draft inducer and has a three pole, four wire configuration. It is rated up to 2A @ 120v or 24v DC with electronic operator switching. The Mac series controls offer greater safety and convenience than conventional snap action controls with microprocessor logic and built-in diagnostics.