Marley Engineered Products 3900-2010-000 Unit Bearing Qmark Electric Marley Motor 5.3 Watt, 1550 RPM, .26 amps, 208-230 Volt #

208/240V 1550RPM CW MOTOR

Marley Engineered Products 3900-2010-000 Unit Bearing Qmark Electric Marley Motor 5.3 Watt, 1550 RPM  #. The Marley Engineered Products 3900-2010-000 Unit Bearing Qmark Electric Marley Motor is a 208/240V 1550RPM CW MOTOR.

This Marley Engineered Products bearing motor is made by Marley and packaged by Qmark. It is a 208/240V, 1550 RPM, 5.3w, .26 amps motor designed to replace an old or broken motor used with your electric floor furnace.

The 0000 model is .23 HP and has a full-load current of .26 amps at 208/230 volts. The rated output frequency is 60Hz. The shaft diameter is 1/16" and shaft RPM is 1550.

The Marley Engineered Products 3900-2010-000 Unit Bearing Qmark Electric Marley Motor 5.3 Watt, 1550 RPM, .26 amps, 208-230 Volt is perfect for use in your home. With a 59000 BTU Output this Motor runs at 1550 RPM and creates 5.3 Watts. The Motor has an Open Coil Construction with #40 Enclosed Phase, No Fan Required.   The motor is approved by CSA, The Underwriters Laboratory, and ADA Compliant

Marley Engineered Products 3900 Series Motors are manufactured by Qmark. Marley is a quality line of motors that are built to last. These reliable models are offered in 6 sizes to fit any application. The Qmark Electric motor comes with a limited ten-year warranty and has a stator temperature limit switch on the stator which turns off the motor if this temperature becomes excessive, preventing damage to the motor. This Marley Unit Bearing Motor is designed for commercial, industrial, or mining applications. Marley Engineered Products 3900 Series Motors operate at 208/240 Volts and are factory rated. These efficiency motors

5.3 WATTS 0.55 amps 208-230V 60Hz

The MARLEY Engineered Products 3900 Series Single Phase AC Electric Motor with Unit Mounted Bearings has been designed for durability and versatility with superior performance as well as thermal protection. The bearing units include a carbon brush seal that will help keep dust and debris from entering the bearing area when in operation. This also helps with added smoothness when operating over long periods or in high temperature environments. The shaft is protected against conditions of high temperature and prolonged exposure to moisture which may be detrimental to its performance.