Marley Engineered Products 490059004 Marley 4.4" Electric Motor (7108-2122) 1500 RPM 208-240V #

208-240V 1500RPM CW Fan Motor

The Marley Engineered Products 490059004 is a 208-240V 1500RPM CW Fan Motor. It's a 4.4 inch electric motor with a 1/8 inch shaft and Ball Bearings.

The 490059004 Marley 4.4" Electric Motor is a 208-240V 1500RPM CW Fan Motor with 18 x 38 frame, mount distance of 6 blade.

Marley 4.4" Motor - 1500RPM, 208-240V, CW (CCW Shaft) fan motor uses 1/60 hz step motor drive and is designed for high horsepower loads and can be used in applications where lower start up torque and higher starting speed are required. Fan features a sealed ball bearing and shaft adapter for attachment of fan to blower wheel. Motor frame is pressed steel with porcelain enamel finish. Hardware included

The Marley 4.4'' Motor is a 1500 RPM, 208-240V CW motor with a 4.4" diameter and 17 mm length shaft. It has a single phase permanent split capacitor (PFC) design that is meant for ventilators, blowers, fans and other applications where high power output at low speed, as well as low power at high speed is required.

A single phase AC fan motor is a dc brushless motor designed for use at 208-240V 50/60HZ. This fan motor has a frame size of 4.5" x 4.4" x 2.3" and a 1 horsepower (hp) operating voltage of 208-240V with a holding torque of 15.0 X inch pounds (in/lbs.). DC brushless motors are operated by variable frequency drivers and are typically used in exhaust fans, roof vents, computer cooling and other applications requiring quiet operation and low noise.

The Marley 490059004 4.4" Fan Motor is a direct factory replacement motor that will fit all of Marley's commercial, industrial or residential ventilators. This is a self-contained and permanently lubricated fan motors with integral field winding's, ball bearings and a field pole bushing. It is designed to give quiet and steady operation and for long trouble free life.

This 1500RPM motor is assembled with a copper rotor, shaft, and bearings. The shaft and bearings ride in a sealed aluminum housing for long life and high torque. Terminals are plated cast lead-out wires for AC/DC applications. This design can be used at full load continuously to 480 overloads per year. The Marley Motors Warranty extends to the original purchaser only.