Marley Engineered Products 5018-0003-000 Berko / Marley / QMark RELAY-(CONTACTOR)2POLE 30AMPS

24v Coil 2P 20AMP CONT

The Qmark/Marley 5018-0003 is a 2 pole 20 amp contactor with 24 volt coil. The 502 3-000 series contains three contacts on one end and three pairs of screws for the bus bar on the other end. For use in Marley fireplace products, Qmark commercial electric fireplaces and stoves.

The 5018-0003-000 is a 24 Volt Relay (contactor). It has a 2 Pole, and 20 Amp rating. The relay has a coil voltage of 4.5 V DC, and comes with an actuator lever. Applications for this relay include Appliances, Electric Fans & Blower Motor, Lighting Systems, Power Supply Adapters, Security Systems, Small Motors and Heating Equipment.

This Berko / Marley / QMark 30 Amp contactor relay is a 2 pole 20 Amp contactor relay of the cont type. The flexible 2-conductor wire leads, designed to fit in 16-14 AWG outlet ports, are made of 18-22 gauge stranded copper wire with 200 degree C maximum wire temperature rating. This style is offered in both plug and modular formats.

The Relay Mechanical Contactors come in your choice of NEMA size 1 or size 2 and amperage 20Amps to 50Amps with a Normally Closed coil. The Coil operates on 24Vdc using 110Vac as the energizing voltage. The Relay has a double mechanical lug on top that mounts through your panel stand-off, eliminating the need for an auxiliary bracket.

Contactors are widely used in electric power transmission and distribution. They are used to control starting, stopping, and breaking of large electric motors or generators. Contactor 2 Poles 25Amp.

The 2P20A Berko Contactor is a Sargent and Greenleaf part and is intended for use with a relay system. Relays are used to control the operation of devices such as lights or air conditioning equipment. The status of the device being controlled is monitored by the switch in the relay and when the status changes, power is switched from one device to another. This battery-operated contactor can handle voltages up to 30 volts DC and currents from 1 to 32 amps.

This contactor relay is constructed of plastic with a copper wire coil. It also has an adjustable mounting bracket. It comes in a white finish and is two pole, and operates on 120 volts. It has a 1/2 hp, 2,400 rpm motor with a 10 amps maximum load at 1.25 vac.