Marley Engineered Products M600MTP 2STAGE 22AMP LINE VOLTAGE STAT

2STAGE 22AMP LINE VOLTAGE STAT

Marley Engineered Products M600MTP 2STAGE 22AMP LINE VOLTAGE STAT, For Use with: Portable Generators and Engine Start Boosters

The M600MTP is a 2 Stage, 22 amp line Voltage Stat designed for many electrical applications including; humidifiers, heating and air conditioning units, pools and spas, household fans and much more. Designed to work on 208 to 240 volt 3 phase lines. Perfect for medium-duty applications or where aesthetics are important. The front panel LED's are easy to see day or night and can be set with 2 different colors (red or green); the choice is yours!

Marley Engineered Products 600MTP 2 Stage 22 Amp Line Voltage Stat. It doesn't matter what you plug into it, the first stage will come on at a set point and the second stage will come on after the first stage is satisfied to protect your equipment from getting over heated. I highly recommend this product if you're looking for real quality and not just another unnecessary product.

The Marley M600MTP 2-Stage 22amp line voltage stat is the ideal choice for protecting your home or business from short circuits, overloads, and high electrical demand. Every stat is load tested at the factory to ensure Overload Protection, while the Power Failure Backup option helps provide additional security in the event of a power outage.

Go green with our M600MTP 22A 2-stage line voltage stat. This unit uses an electro-mechanical switch to control shop fans, pumps, conveyors and other industrial equipment.

This Marley Engineered PTC Heater, 600MTP is a stage-voltage-time overcurrent protection device designed for use on the supply side of an ampere-rated circuit not exceeding 600 VAC at 50/60Hz. 100 degC Dry Bulb rise is required to cover full range of ambient temperatures. Ratings include 2 stages 22A and 100A, rated current 0.9A, 600VAC, 100% rated voltage 516VAC, Non-linear amp rating of 30A (RMS), Max non-sag dc 1.5 A (RMS).

Marley Engineered Products presents the line voltage single phase transformer with 600 watts on primary side and 300 watts on secondary, 1 Ohm input to 1 Ohm output ratio, 22 amp secondary fuse and 30 (85C)CSA rated terminals.

The Marley M600MTP line voltage switch is engineered for superior performance and unbeatable style. Features include:

Designed with a standard three-wire outlet, the M600MTP makes it quick and easy to safely operate indoor or outdoor electric tools on your project site. A red light indicator will confirm when the correct line voltage is present and warn that power is being supplied to the tool.

For over 50 years Marley has been designing products for the HVAC industry. Over the past few decades Marley has expanded into the plumbing, electrical and water purification industries. As a customer you can be assured that our high quality products are designed to meet or exceed the specification of industry standards, including ADA compliance. We back up each of our products with customer support that is second to none.