Maxitrol TS394-3B-48FQ TEMP SENSOR FOR AD1094 TEMP SENSOR FOR AD1094

TEMP SENSOR FOR AD1094

This is a brand new Maxitrol TS394-3B-48FQ TEMP SENSOR FOR AD1094. It works with several other temp sensor products including Maxitrol part number NS140, AN140, AD1094, 1406A56, 12A1..

This is a temperature sensor to be used with the AD1094ADC converter. The AD1094 combines a precision micropower current source, an on-board precision resistor network, and a calibrated reference voltage source in one convenient package.

A 10K thermistor for the Maxitrol® AD1094 Controller.

The AD1094 is a 2-wire, NTC thermistor temperature sensor with simple serial interface. The thermistor has a nominal resistance range from 5O to 1MO, and it senses temperatures ranging from -31°C to 125°C (to top of epoxy only).

The AD1094 is a complete analog front end dedicated to high accuracy temperature measurement, designed to measure the junction temperature of Microprocessors with an output on the Analog Output Pin.

Temp Sensor For

The AD1094 is a fully dedicated digital high-precision thermocouple input converter for systems that require 16-/18-bit, 19.2kHz performance. It features a high-precision TMP36 ovenensitive voltage reference, an ultra low drift voltage reference and on-chip multipliers to convert the high resolution TC voltage output into a standard 12.24MHz analog signal that can be fed directly into a microprocessor or DSP.