MCKINNEY EP-5J-26D EP-5J 26D Rescue Hardware

TOP PIVOT AND SOCKET

This MCKINNEY EP-5J-26D TOP PIVOT AND SOCKET consists of top pivot and socket. It's suitable for 5/16 "-18" bolt and 3/8 "-16" bolt. Recommended operating torque: 14.6-22.9 lb/ft (20-30 kgf/cm). The product steel grade is STD and the product finish is zinc plated. Top pivot and socket Top pivot and socket Top pivot and socket Top pivot and socket Top pivot and socket Top pivot and socket Top pivot and socket Top pivot and socket Top pivot and socket Top pivot and socket

With the EP-5J-26D Top Pivot and Socket, you can work overhead in tight spaces, clear light obstructions and reach high ceilings all with one tool. The top pivot lets you rotate your tool head in a 180° arc for horizontal or vertical use. When the job calls for a horizontal approach, simply push down on the socket end of the tool, which lowers the tool head to a horizontal position.

The MCKINNEY EP-5J-26D Top Pivot & Socket is a two-piece locking straight blade connector with a 5/8" pin shank. The shank pivots to allow for easy connection to the viewing head at any angle. Next, the viewing head assembly may be swiveled 360 degrees for precise alignment of equipment no matter how it is mounted.

A top pivot and socket allows the arms to adjust in a horizontal or vertical plane. The socket can swing 90 ° up or down, reducing or widening the arms' potential arc. This design eliminates the need for undesirable fixed converging arms.

The EP-5J-26D is a durable and compact Energy Chainfall with an oil-resistant, black, premium leather harness that is attached to a 5/8" top pivot. The strength of this Energy Chainfall system is achieved through several key features: Tightening and release is easy and can safely be done using only one hand; the top pivot and socket design allows the load point to be placed up high or down low; and, the unique four-way pivoting leg arrangement allows optimal positioning of the load relative to the anchor point.

The EP-5J-26D is a five function, four way top pivot socket set designed for the general purpose screw driving tasks. The EP-5JC-26D contains six basic tools, plus an upgraded sliding T-handle, to handle most automotive assembly and installation jobs.

Pivots and tightens pipe using a standard wrench. A knurled jaw face allows grip on pipe, and a socket can be tightened to provide tension in the pivot. Made for ¾ in through 2-in (28mm through 50mm) OD pipe.

The EP-5J-26D can be mounted to the floor or ceiling. The 3/8" solid stainless steel screw is designed for years of trouble free service. The multi direction socket allows rotation of the lamp head to direct light where it is needed.

The EP-5J-26D is a Type 1 5/8" stud panel knob and washer set for use with EP-Series electrical panels. The EP-5J series provides a variety of rotary control configurations.

The EP-5J series can be installed with the cable system provided on top of the ceiling. The EP-5J series has a hanger for this installation method, and can be mounted on 2 hangers to provide more stability.

Two-handle kitchen faucet with a graceful, reverse curve design adds a beautiful, a traditional touch to your kitchen. It features a stylish pull-down sprayer and ceramic cartridge for smooth control.

The EP-5J-26D accepts the following: