Honeywell 108480 - DAMPER ACTUATOR, NON-SPRING RETURN, 175 LB-IN, FLOATING CONTROL, 2 INTERNAL SWITCHES, 24 VAC +/-15%, 50/60 HZ (N2024-SW2).

Two Position, Floating Actuator - 175 lb-in, Non-S

Two Position Floating Actuator - 175 lb-in, Non-Spring Return, for use with 3/4"-10 Stem Cylinder.

HONEYWELL® - DAMPER ACTUATOR, 175 LB-IN, TWO POSITION, NON-SPRING RETURNActuator, Non-Spring Return Type, Two Position, 175 lb-in/13.4 Nm

Get the most from your home comfort systems. Honeywell Automation Products are ideal for customized comfort and controls options that help you enhance both energy efficiency and system performance. The Honeywell 108480 is a 2 Position, Floating Actuator with an internal yoke, and is powered by 24 VAC (20-24 VAC).

The 108480 is a 24VDC, 175 lb-in, non-spring return, 2 internal switches, 24VAC +/- 15%, 50/60Hz Actuator with two position motion and a manual override. The actuator outputs are full range. This cylinder can be used for electro-hydraulic door control and general purpose industrial applications.  These dampers come with adjustable shafts that affix to the damper mounting plate, various stop assembly and limit switches , and all necessary hardware to attach these components to the damper mounting plates.  Attributes of these dampers include: Amb

The Honeywell N2024-SW2 damper actuator non-spring return with two internal switches is designed to control modulating dampers, such as those found in rooftop HVAC systems. Features a two position, floating actuator that requires a minimum of 3/16" (4.76 mm) of additional travel. It is supplied with an 11 ft (3.35 m) cable and is constructed from nickel plated rolled steel.

The Honeywell 108480, DAMPER ACTUATOR WITH SWITCHES is a 2-position, floating actuator used to interface between a control signal and position feedback. The semiconductor devices are bistable (two state) switches. They will be in a high impedance state whenever the null or zero point of the position signal is reached. When operated with an input voltage, they open or close a load circuit in response to the polarity of the input signal at any time.

The N2024 is double polarity, zero position, floating travel actuator that requires two internal switches to operate the damper. The switches are non-spring return and pivot to an off-centered position when activated.