Honeywell 99857 24V 0)2-10 Vdc,(0)4-20 mA Actuator-

24V 0)2-10 Vdc,(0)4-20 mA Actuator-

The Honeywell 99857 24V 0)2-10 Vdc,(0)4-20 mA Actuator features a streamlined design and high quality construction that will last for years in harsh environments. This actuator will offer precise settings to any attached control board in liquid or gaseous air applications.

The Honeywell 99857 24V 0)2-10 Vdc,(0)4-20 mA Actuator with Cable is designed for use with the Honeywell 129 and 100 Series thermostats. This actuator has a wire connection and a 4D (two terminal return) connector.

The Honeywell 99857 is a 24V, 0)2-10 Vdc,(0)4-20 mA 2 and 4 output solid state proximity switch.

Honeywell Four Wire, 24 Vdc 0-10 Vdc, 4-20 mA Actuator-

The Honeywell 99857 actuator has a 24 Vdc coil voltage. The minimum detectable level of 0.2 Vdc and maximum level of 10 Vdc. The sensor can be connected to 0.4-20 mA outputs. It is designed with a BNC connector type and 2/slot high power Push 2-Wire header terminals. It has an output range of 3 watts and it works with single-phase current.

The 99857 from Honeywell is a PWM (pulse width modulation) 24 Vdc two-wire input to four-wire output digital proportional rotary actuator. This actuator accepts input from 0 to 10 Vdc or 4 to 20 mA at a selectable static gain of 1, 10 or 100 and can switch on or off with the setting of one logic output bit. An external logic low can also be utilized to force the output on regardless of the input logic state. The module operates with logic low and supports negative logic. The 99857 features are used in applications as diverse as gas and

Set Actuators base setpoint and get web server informavtiy of actuator status