L220-40F Limit Switch
The L220-40F is a limit switch that is designed into the HCB Series heaters. The L220-40F limits the total heat output by monitoring actual water flow through a HCB Series circulation pump. This unit uses either 0/Off or 4 to 20 mA current loop signal connections and has an IP65 rating.
The L220-40F electronic limit switch is used to control operation of the Modine Premier fireplace inserts. The L220-40F limits operation of the blower and firebox burners to a maximum of 40,000 BTU's in a typical fireplace application. The L220-40F also has a normally closed pull for second stage fuel gas.
The Modine L220-40F thermostat is designed for use with the Modine High Speed Residential Furnace. It allows you to program a temperature range in which the furnace will cycle on and off to maintain a set temperature. This 2-position limit switch can also be used as an alarm contact in combination with a separate control logic device.
Formed-Metal 1/2" Hose Barb, Low Temp, NEMA Designation: L220-40F
The use of a limit switch is recommended in the following applications: furnaces, burners, boilers, and units with integral fan motors. The L220 Series provides user selectable points of 0° to 100°F as well as 200°F. Fits in a 1/2" NPT hole.
Modine electric limit switches are designed for use with convection or air-cooled kerosene fired heating appliances. They are UL and CSA certified as a replacement component to the L200 Series. These limit switches have a C rating of 100 degrees Fahrenheit (37.8 degrees Celsius) and are used in applications from -4 degrees Fahrenheit to 114 degrees Fahrenheit (-20 degrees Celsius to 45 degrees Celsius). Modine is an innovative leader in HVAC/R products, thermal solutions, and has been trusted by homeowners and professionals since its inception in 1922.
A Limit Switch has a low voltage AC contactor for switching voltages of 220, 440 or 480 volts at 40 amps. Please use the information below to identify the specifications of your AC contactor: