Modine 9F0300950000 120v 1050rpm 1/6hp Motor

120v 1050rpm 1/6hp Motor

The Modine 9F0300950000 120v 1050rpm 1/6hp Motor has C-Frame design for durability. This motor is also equipped with thermal overload protection for safety.

The Modine 9F0300950000 120v 1050rpm 1/6hp Motor is a replacement motor for your patio heater or space heater. This motor has an aluminum housing and a stainless steel fan, and features a thermal protection device.

The Modine 9F0300950000 is a 120v 1/6hp motor that pumps out 1050rpm. The 9F0300950000 No Hub Mounted Motor from the Classic Series is a 120 volt, 1 phase, 0.11 to 1.0 Hp cast iron fan/motor with a cast iron frame. This unit comes without a hub so all mounting holes for the pump are furnished. This cast iron motor is an excellent choice for general air movement applications, wire grinding and light material moving applications. Features: - Cast Iron Frame - Complete wire leads with clip - Mounting flange #

This product is a 120v motor that is rated for 1050rpm and 1/6hp.

The 9F0300950000 is a 120v 1/6hp motor used to run blowers, and exhaust fans. This particular model has a shaft diameter of 0.563" and is designed for 100 cfm at 0.021" pressure rise. Current draw is 10 amps, and the speed is rated at 1050 rpm. The power usage is 52 watts, the mounting bracket is the same as Modine's standard SFRE1M12, and the motor can be located by using a NMRA-compliant 2-letter code that begins with "B".

Modine high efficiency cast iron, open drip proof motor is 120 volt, 1/6 horse power and has a voltage range of 115- 277 volts. This motor has a maximum speed of 1050 rpm and continuous duty cycle up to 2 hours. This motor weighs 5 pounds and features dual bearings and a built in thermal overload cut out for protection. It also features 0.63 ampere and an 0.1 horsepower thermal protection device with manual reset and a thermally protected 7:1 gear box for convenience and safety. There is no fan blade and the shaft measures 8 inches long and the overall dimensions measure 8.5

The 9F0300950000 is a 1/6 hp, 120 volt, 1 phase, 60 Hz, non-automotive bearing spin case fan motor rated at 0.077 kW, Single Speed.

The Modine heater has a 1/6 HP, 120 Volt motor that delivers 1050 RPM and will heat the tank from 15 to 75° F within 1 hour. Ambient temperature affects operating time needed to reach desired water temperature. Electric spa heater measures 16-Inch long x 9-Inch wide x 7-Inch high.

Drive vent fans via the industry's only 1/6 horsepower, 120VAC-voltage motor. Corrosion-resistant housing and splash-proof external switch also provide long life.

MFG-9F0300950000