MOTOR DUAL SHAFTED 115V/ 60HZ Z-600-6151 FWE

MOTOR DUAL SHAFTED 115V/ 60HZ

Motor Dual Shafted 115V/ 60HZ

The motor is a dual shafted, 115V / 60HZ, three phase motor . The motor frame is stamped steel, with a current rating of 6.8 A, and an operating temperature of 125 degrees C. The output shafts are mounted on needle bearings that allow the shafts to be rotated through 360 degrees continuously without slipping. The drive system employs two dual 2:1 pulleys. When both the number-two and number-three e- rotor are running at the same

The Z-600-6151 is a dual shaft, 115 Volt, 60 Hertz enclosed fan-cooled motor. This type of motor is typically used for heavy industrial applications where the motor has to be completely enclosed in protection from the environment such as dust, liquids or gases. It can also

The Z-600-6151 FWE Genuine Part Two Shaft Motor is a 115V/60HZ motor for use on Fasco DZ Series air cooled units.

Use your PGF with this Motor Controller to power the D-600-5151 Pump. This Dual Shafted Motor Controller, for 6' pump and 6' hose, comes with a Ground Fault Circuit Interrupter (GFCI) that is plugged into a standard 110 volt 60 Hz electrical outlet. Selection of the 6 Amp Full Load Amperage Switch causes the motor to run continuously at 6 Amps if selected.

This 20 Horsepower dual shafted motor is a good sturdy motor. It is specifically designed to properly function in both horizontal and vertical positions, meaning you have double the options for installation when it comes to the Z-600 series and z-601 series stainless steel pool pumps. This unit will pump out 4,000 gallons per hour at a 1-1/2 x 13mm discharge, and cost you only $829.00

Features: 115v/60HZ, Dimensions(LxWxH):9.25" x 7.00" x 4.62", Shipping weight: 3.20 lbs., 1 Year Warranty, OEM Part Number: Z-600-6151 FWE, This item is a special order item. Expected model availability or lead times will vary. Reason for the item's limited availability capacity if ordered now: High Demand