MP INDUSTRIES 4059 MP Industries Pool Pond Spa Fountain Automatic Water Pool Pond Spa Fountain Automatic Water Leveler Short Arm Auto Fill Valve New

FLOAT VALVE ASSY MP INDUSTRIES

The MP INDUSTRIES 4059 Pool Pond Spa Fountain Automatic Water Leveler Float Valve Ass'y is a genuine OE replacement auto fill valve. It is designed carefully to be compatible with most brands of spa's and fountains where direct-drive pumps are used. The float valve ass'y will level the spa water automatically when the water level falls too low. This part is used to prevent overfilling through an automatic back-flow adjustment. It also assists in maintaining the proper operating water level, so that air cannot be drawn into the system, causing damage.

MP industries automatic water leveler short arm float valve assy is designed as a replacement for your existing float valve and bladder assembly, maintaining your pool's water level automatically.

MP Industries 4059 Float Valve Asy MP4059. This automatic fill valve replaces the float in your water feature and automatically turns the water on when it gets low. The kit includes a top-of-the line 20 amp solid state relay and 10' of wire that connects to any 120 Volt GFCI protected power source (timer, transformer, GFCI power source, or AC powered transformer). Dimensions: 6.5 x 2.75 inches (16.5cm x 7cm)

The MP Industries Float Valve is a short-arm automatic fill valve designed to lower and raise a submersible pump as water levels in the pool/pond drop or rise. This Float Valve consists of two components; an outer tube, and an inner valve disk. This Float Valve Assembly is designed for water levels in a pool or pond that varies from 3 H.P. to 20 H.P and has automatic operation at a minimum water level of 2'1" (79 cm).

MP Industries 4059 Automatic Water Leveler, Short Arm, Auto Fill Valve. MP Industries automatic water fountain - For pools, ponds and spas that use pump flow, this float-activated air valve controls when the water is pumped overboard to the filter, returning and re-filling automatically once the pump shuts off. Features: Float attached with hose clamp to a 5/8" Barbed Ball Valve Activated by water level in the pool or spa Prevents damage from pump cavitation 3/8'' barb outlet Fits 1'' or greater vinyl tubing Maximum recommended working pressure of 120PSI.

MP INDUSTRIES SPL-4059P-K5 – MP INDUSTRIES is a well known brand ……

Our Float Valve Assembly is used to raise, lower, and automatically maintain water level in your pool or pond. Our Float Valve Assembly with Short Link Arm comes fully assembled, tested, and ready for installation. You can also adjust the spring tension to vary the lift of the float valve.