Honeywell 11297 , Inc. Pneumatic Damper Actuator, High Force, 3.5 in. stroke

PNEUMATIC PISTON OPERATOR 3-13 PSI

The Honeywell Pneumatic Piston Operator 11297 is designed to control dampers in air conditioning systems. It uses standard 0.75" I.D. tubing and has a piston travel of 3-13 psi. The actuator comes complete with 3/4 in nylon rod, 1/2 in nylon rod, 2-1/8 in bellows, piston assembly and motor housing kit.

High Force Pneumatic Piston Operators for the UK, Ireland and Europe. Solid body actuator designed for higher force applications. Supply pressure is 3.5 psi (26 bar, 400 kPa) at 350 cfm (12 m³/min) free air delivery. Stroke of 0.5 in (12 mm) Includes adjusting screw mounting hardware for easy installation on standard flanges. Model 11297 is supplied with a cylindrical bearing receptor and a pin to limit

NOTE: This actuator has 3-13 psig input pressure. The output stroke will be determined by the

Two handed operation. The handle on the back of the actuator is grasped and pulled toward the operator to open the valve. When released, it will automatically reset to neutral position. It opens any pneumatic actuator up to 350 lb. This actuator has a fixed stroke length of 3-1/2 inches (87 mm). Requires 5 cubic feet per minute at 3-13 psi (0.4 m3 / min at 30 bar) of compressed air with a flow rate of 32

A high force pneumatic piston operator is suitable for applications requiring high movement in a small or confined area. The cylinder is able to be cored out for quick configurations and changing.

Honeywell 11297 Pneumatic Damper Actuator, High Force, 3.5 in. stroke is a pneumatic piston operator that is designed for high force applications. It is suitable for use on doors, windows and other movable parts.

The 11297Pneumatic-Operator is part of Honeywell,s single stroke pneumatic actuator systems. This series is high force and is recommended for valve sizes 1/8 to 1-1/2 inch. This operator comes standard with a low pressure port and a low pressure diaphragm that can easily withstand high forces. It also has a high pressure port designed to work with either a stock or tulip style blowout prevention safety cap. With an adjustable arm ,