120VAC 50/60 Hz, SPRING RETURN MODU
When installation is a breeze: choose Barber-Colman MP Series Plug-in Relays. The MP5610 is a spring return modulating action relay which functions by amplifying the voltage from the control source to directly turn on and off a load. It is ideal for use in water chillers, air conditioning systems, heat pumps, pools and spas, as well as other applications such as boiler controls and solar control panels.
The Schneider Electric 30208 is a 4-20 ma, spring return dollhouse stop valve, with 1/2 inch male NPT inlet and outlet ports. The dimensions are 2 3/4 inch diameter by 1/2 inch thick.
Two outputs at 4-20 mA, heavy-duty industrial control valves used primarily in water and wastewater treatment. The high quality S/R contact range offers these advantages over other configurations: ON operation is reliable and maintains 15% of nominal coil current even when the coils are shorted. The reliable, low power off operation can be achieved with either zero or 30% of nominal coil current The MPR 5610 operates on 120 VAC 50 Hz/60 Hz at 115 VAC load. The 4-20 mA output is adjustable from 0 to 20 mA by adjusting contact bounce threshold, and 0 to 10
The MPR-5610 relay offers the convenience of a spool mounted micro pilot light and allows for adjustable time delay, adjustable current (ON), and adjustable set point (OFF). The MPR-5610 is a three terminal 30208 (Barber Colman) contact rated at 2A@240VAC and 10A@120VAC.
The Schneider Electric 30959 25 ft 2-wire 10 outlet heavy duty 14 gauge power cord is a right angle to 90 degree straight power control cord. It has a molded female plug on one end, and an ungrounded 4-20 mA male plug on the other end. The tip of the male plug is bent 90 degrees from the left side of the cable.
The 30208 is a 1/8" to 4" control valve for sanitary food and beverage applications requiring integral, low pressure power operation up to 20mA. Standard electrical connections include 5-pin, 4-position modular connectors for NEMA configurations W or Y. The MPR-5610 series is designed for liquid soap dispensing. Water diverter options are available.
Avalanche energy metered action/response 2-wire 120 VAC thermostat for oil furnaces, steam boilers, convectors, water heaters and other equipment requiring a 24 VDC relay trip signal
Free Shipping
In stock
