Bronze check valve for use in commercial and industrial applications. Typical services include; hot and cold water, HVAC, steam, compressed air, gas and other general utility services.
Check valves are used to prevent backflow of hazardous liquids and gases in applications such as; water, air, oil and other liquids. Use this bronze check valve for hot and cold water, HVAC, steam, compressed air, gas and other general utility services. It is constructed with a PTFE seal seat ring and is suitable for operating temperatures up to 600°F (315°C).
Nibco T-413-Y-LF Bronze Check Valve is ideal for commercial and industrial applications. It features a brass body, PTFE seat, swivel fully-lead free swing design. It is constructed of bronze which provides resistance to corrosion and abrasion.
The Nibco T413-Y-LF Silicon Bronze Lead-Free Check Valve is designed for use in commercial and industrial applications. This 2" check valve has an FIPT (female pipe thread) with a PTFE seat.
This Nibco Bronze check valve handles 125 PSI, features easy swing handle operation, and a stainless steel body as well.
Achieve maximum fluid control with our NIBCO® lead-free bronze T Series check valve. The check valve features a PTFE seat and a patented vertical swing swing arm design, which provides a cost effective solution to your fluid control needs. It is suitable for most commercial and industrial applications.
Nibco" T-413-Y-LF Bronze Check Valve 2" NPT Female x 3/4" Male NPT from the Bronze line of swing check valves provide maximum flow rates with a very low profile design. Check valves are used in applications where process or discharge piping must be isolated from the suction line to impede flow back to the suction side. Requirements may include pressure, temperature and chemical compatibility such as brine, glycol coolant, seawater, chlorine and steam.
Valves such as this Bronze Check Valve are used as a flow control within a pipeline system. It is usually utilized to stop the flow of fluids or gases through the pipeline. This type of valve can be designed for either manual or automatic operation. The continuous-flow valves are sealed by hand or with a ratchet handle that may have a turning knob that tightens around the valve shaft.