US MOTORS 5471 Nidec- "1/5-3/4hp

"1/5-3/4hp

The US Motors 5471 Nidec- "1/5-3/4hp horizontal motor with cast aluminum frame has an 1150rpm B3, 60Hz, 208-230V/460V connection. This motor is commonly used as a blower or fan motor when themperature setting must be selected based on room temperature.

The US Motors Nidec motor is designed for a variety of uses. It is suited for working in the fields of kitchen, garden, industry, and construction equipment. This motor is 1/5-3/4hp, has a frame diameter of 4" and a shaft diameter of 1".

The US MOTORS UMC1-C108A is a 1/5-3/4hp, 110v, AC, shaft mounted, permanent split capacitor motor. Consisting of a 1/5hp and 3/4hp double-shaft design, the UMC1-C108A Series motors are industrial grade motors that offer high power and efficiency.

Our small, portable drive motors are the ideal solution where high torque, smooth operation, light weight and low vibration is needed. The motors offer the following features: - Nidec brand ultra-high torques - 1/5-1 horsepower - 60 oz-in (4.3 kg-cm) or more torque at 12 Vdc - Heat sink with thermal overload protection system - Internal silicon rotor available

This listing is for a Nidec US Motors 5471. Runs on 1 Phase at 110 Volts. This motor is rated at 3/4 Horsepower with 1160 RPM and at 208/460 Volts it is rated at 1/2 Horsepower with 1160 RPM. Has a 10" diameter fan blade, Overall diameter is 13". Comes wired for 1 Phase, 220v, 60 cycle power supply.

Our 5471-4L is a 1 speed, totally enclosed, permanently lubricated, deep well motor with a 7/8 inch shaft. This hard-working little powerhouse is designed for continuous duty service on pumps and fans used in many residential and commercial applications such as air conditioning and heating systems, refrigeration and freezing equipment, irrigation systems, water works construction equipment, oil field drilling operations and other industrial applications.

The 5471 is the most powerful motor in this size, with only a 20% increase in price over the next size down.