WEBSTER OSV-50 OSV-50 OIL SAFETY VALVE 1/2" OIL SAFETY VALVE 1/2"

OIL SAFETY VALVE 1/2"

Safely operate your equipment with the OIL SAFETY VALVE 1/2" from WEBSTER. This valve is specifically designed for hydraulic equipment that requires a cooling oil safety device. It is made from metal and is black in color.

1/2" OIL SAFETY VALVE 1/2"

Webster Valve part #OSV-50 1/2" OIL SAFETY VALVE 1/2" LONG NPT WITH 1/8 (5mm) STUB AXIS AND MALE NPT. DO NOT BUY IMITATION FAKE UNCONTROLLED PRODUCTS. WEBSTER IS A USA MANUFACTURER OF VALVES, FITTINGS AND ACCESSORIES PURE ISO 9001:2008 CERTIFIED MANUFACTUR

Webster Webster O.S.V.50 Oil Safety Valve 1/2" **** The OSV 50 is available in brass or stainless steel, with a manual handle and drain plug for easy removal and maintenance. The OSV-50 is available with secondary containment as add-on products, to make the system compliant with ASME Section VIII Div 2 requirements. Secondary containment can be provided via an electrolytic soft copper (brass) or aluminum component molded directly onto the valve body, or by installing

Webster® oil safety valves are available in four sizes to satisfy a variety of applications. They are self-starting and have virtually no flow restrictions, even in restricted lines. The spring-loaded poppet disc automatically opens at the preset high level of flow, shutting off the oil and preventing possible damage to the heat exchanger. Single and double seat models are available, as well as models with drain service ports for automatic relief. 1/2" NPT models are recommended for use on firebox

The Webster Oil Safety Valve OSV-50 is a manually operated, gate valve designed to control venting of a steam line if the relief valve on the boiler or pressure vessel fails to operate. The OSV-50 can also be used to isolate the boiler cold water connection from a pressure vessel. Features 1/2" NPT Connection, and 1/2" Copper Tubing Connection.

Webster Oil Safety Valves are designed for use with plastic or metal piping having NPS 1/2" size in the system, where it is necessary to prevent leaking of the fluid at a pressure of 6300 lbs. gage (4 kg/cm2).