FanCycle R410A 300-400# SPST
The FanCycle R410A 300-400# SPST pressure switch is used in an exhaust fan, an air conditioning package unit or a packaged cooling unit. The switch has a nylon seal to prevent leakage when the switch is closed.
The FanCycle pressure control is designed for use with R-410A refrigerant. The unit switches on at a low setpoint pressure and switches off at a high setpoint pressure by an external control signal. The cycling type of the control is SPST (Single Pole, Single Throw) with internal diode.
FanCycle is a 3HP, 4P, R410A snap in panel mounted thermostat that acts as a switch to the outdoor fan motor. It is programmable to on (fan on) during the cooling season, and off (fan off) during the heating season. The FanCycle is a DPST switch (on) at high pressure and (off) at low pressure. The operating temperature range is (- NOT -)47F to 140F. FanCycle has a two terminal design with external terminals and a 7/32
The FanCycle pressure switch for Johnson Controls R410A equipment is an easy replacement for the standard JCI pressure switch. These switches can be used to cycle an electric fan on and off (usually ducted), and are pressure compensated, which allows adjusting the fan point.
FanCycle is an economical pressure control switch designed to control fan cycling on refrigeration systems using R410A.
The FanCycle pressure switch with SPDT contacts is used in air conditioning and refrigeration applications for either Hi/Lo or On/Off control. The FanCycle is a cost effective, durable and versatile pressure switch.
The FanCycle is a direct drive fan designed specifically for use in air conditioning and refrigeration systems. This high pressure fan cycling open device operates by opening the high pressure switch at 300 psig and closing it at 400 psig
Free Shipping
In stock
