ENCAPSULATED PRESSURE CONTROL 400-3
THE JOHNSON CONTROLS P100CA-1C ENCAPSULATED PRESSURE CONTROL 400-3 IS A 100 PSI MONITOR AND CONTROLLER, WIRED FOR 3 FURNACES. THE CONTACT IS ENCASED IN A CLEAR COVER AND CONTAINS A CONTACT BLOCK, COMPUTER AND TEMPERATURE TRANSDUCER.
The P100CA-1C Encapsulated Pressure Control 400-3 converts the airflow of the commercial HVAC system to energy with the use of Johnson Controls High Pressure Switch. High pressure switch is certified by CE Certificate and ISO9001 Quality System Standards. The encapsulated pressure control maintains the precise flow of air for higher energy efficiency.
The Encapsulated Pressure Control is used to precisely control the process environment for paint, coating, plastic, adhesives, converting and other industrial applications. The control will accept 250 psig to 400 psig input and maintain a pressure to within ± 1 psi. It has three ranges: 0-15 psi range for paint and coating applications; 0-35 psi range for PPE applications; and 0-40 psi range for general industrial applications. One or two control locations can be obtained.
When you need a reliable, trouble-free controller—one that's tested and proven to meet the demands of numerous applications—choose the Johnson Controls P100C pressure control. Engineered for reliability, this explosion-proof controller is your solution when only the best will do. With an NEMA 12 case and easy-to control knobs, this encased pressure control is available in various output ranges up to 100 psig and with a 0.5 second time delay.
Increase the efficiency and reliability of your system operations with a Johnson Controls P100CA-1C Enclosed Pressure Control that can be used as a booster or as a stand-alone pressure control. It is designed to enhance the performance of your HVAC equipment.
A residual pressure controller maintains the pressure in a potable water heater to 45 psig, 55 psig or 65 psig, as specified. The controller uses a patented, linear sensing element with a range of 0 to 70 psig. The sensing element is encapsulated for protection against contamination and corrosion. An LED fault indicator on the front panel provides status information at a glance, and field-adjustable set point protection guards against excessive pressure changes. A mechanical lock on the front access removable cover provides increased security in high-risk environments.
The JCI P100CA-1C Pressure Controller is designed to select the nominal set point at which the process is controlled within a set tolerance. Its design is certificated only for the control of pressure processes.
The JOHNSON CONTROLS P100CA-1C protects you from air leakage, condensate overflow, explosion, and fire. The Johnson Controls P100CA-1C Dual Sensing Pressure Relief Valve is designed to safeguard against all potential safety hazards.
The P100CA-1C is the newest addition to our pressure relief product family. It features an easy to read LDC display with analog bar graph, high flow rate connection, and encapsulated high temperature signal diaphragm.
The Johnson Controls P100CA-1C Pressure Controller (P100) is a three-element alpha (a) controller which, when used with an AO Smith OVSD, regulates the superheat of the steam. The AO Smith OVSD provides very-low-sulfur, zero (0) percent ash, 95 percent efficient steam to the process.
A wide variety of fluids are transferred under pressure. The degree to which these fluids are being protected from atmospheric contamination or vapor pressure depended upon the construction, design, construction materials and casing failure modes developed by the manufacturer. Pressure containment is one method for providing fluid protection. The type of pressure containment device chosen will depend on the system application. An understanding of the various methods available for achieving pressure containment will assist in making appropriate choices.
For metals processing, food and beverage industries, laboratories and water purification Plants/
Free Shipping
In stock
