JOHNSON CONTROLS P32AC-8C P32AC-8C DIFFERENTIAL PRESSURE CONTROL 0.05"

DIFFERENTIAL PRESSURE CONTROL 0.05"

Featuring a differential pressure control of 0.05" (Sensors, Small) and a number of other exciting features, this is truly a remarkable product.

The P32AC-8C Digital Differential Pressure Control is a four wire ±10% full scale 0.05" H2O to ±20% full scale 0.4" H2O, Class 4 device which has been designed to sense and control overpressure and underpressure within a closed fluid system.

The Johnson P32AC-8C Differential Pressure Controller is designed for multistage process applications where a wide differential pressure control range from 0.05 to 2" WCG is required, and features an electrical bias option for external sensing.

This Differential Pressure Sensor is an great way to convert a differential pressure transducer into a servo output device. DIFFERENTIAL PRESSURE TRANSDUCER.

This Johnson Controls P32AC-8C Differential Pressure Control monitors and controls differential pressure. This differential pressure control is direct acting and includes a diaphragm stresser which reduces seal leakage. The control uses CAP850 capacitors which can handle higher differential pressures. The device operates in a Vdc power supply.

The P32AC-8C differential pressure control is a field configured 4 to 20mA device. The differential pressure control measures differential pressure and transmits 4 to 20mA signal based on the measured value of the differential pressure. The 4 to 20mA output is active high and has fixed trip levels based on plant requirements.

For use on PV and PVH Series Blowers, unless recommended otherwise by the system designer. This new differential pressure control with lock-out provides direct blow for cooling or heating, and may be used with or without desuperheating. It has large, easy-to-read dials and long life contacts.

The P32AC-8C differential pressure control is a positive displacement pump with a built-in pressure recorder. The controller measures differential pressure and converts it into a 4 to 20 mA signal for use by a panel mounted indicator or a remote indicator or programmable process controller. The two noncontacting sensors work down to 0 psig with no measurable flow restriction, and produce extremely low flow rates of 0.1 gpm.

Ideal for boiler pressure control, process control, and pneumatic applications requiring a differential pressure over a wide range. Applied in the chemical, pharmaceutical, oil and gas industries for a variety of critical processes.

The P32AC-8C is a Digital Pressure Controller with a single output and range up to 2.0" [51 mm] WC. This controller is used in many applications such as boilers, hydro power and cooling towers and in fire and gas systems where inlet and outlet pressures must be controlled in order to prevent the flow of condensate or pressure variations due to flow changes. The controller provides 24 VDC control power directly to solenoid pilot valve pilot valve pilot valve pilot valves.

Designed for use in air-conditioning and refrigeration equipment such as room air conditioners, packaged terminal air conditioners, split system air conditioners, and comfort cooling systems.

SOPAR SYSTEMS 0(X)10 CONDUCTIVE GASKET