PRESS.TRNSDCR 0-100PSIw/harnes
The Johnson Controls Johnson Control 170125 P499RAP-101K PRESS.TRNSDCR 0-100PSIw/harnes is one of the best products on the web. I figured the purchase price would be very high. But the overall quality made me crazy about it. This product is very unique, made of quality materials. It deserves respect. The design is very well done. Not only me, but all my friends too were amazed by this product. For sure I will order more products from this seller."
The Johnson Controls 170125 P499RAP-101K PRESS.TRNSDCR 0-100PSIw/harnes is a Keypad Digital Pressure Transmitter with a linear output for sending a 4-20mA signal to a control panel. This unit is designed to measure negative pressures in refrigeration and air conditioning systems. 18V DC Adapter included.
The Johnson Controls 170125 P499RAP-101K PRESS.TRNSDCR 0-100PSIw/harnes is a 2 wire output w/ sensor and harness assembly with 3ft of cable and a single port 1/4 NPT female threaded quick connect. This product is vapor proof and encased for use in hazardous locations.
The PRESS.TRNSDCR (transducer) - features 100 PSI full scale range, programmable MIN & MAX alarms, non-volatile zero and span registers, RS232 interface for scanning/downloading data to either Windows® or UNIX® computer systems.
Increase productivity by integrating your HVAC equipment into building automation systems (BAS/BMS). The PRESS.TRNSDCR employs remote pressure transducers that can be used to monitor and control equipment functionality in low cost, easy to install units.
A heavy-duty transmitter used for measuring electrical, pneumatic or hydraulic pressure that are available in a wide range of gauges. So you can have an accurate reading. 100% Factory Calibration, 0-100 psi scale pressure gauge with 1% accuracy.
The Johnson Controls P499RAP pressure transmitter is a process instrument that monitors fluid pressure to display it in Pounds per Square Inch (PSI) or in HectoPascals (hPa). It can be connected to a control system through its transmitter, terminal block, and indicator hardwired cables. This is a 0—100-psig (0—7.6-bar) process instrument with one 4-20 mA output and one high/low limit output. It has an accuracy rating of ±1% at full scale and is suitable for use with liquids and air.
This Digital Programmable HART Combination Pressure Transmitter is designed for harsh chemical environments. This transmitter is available with three types of signal outputs, the 4-20mA current loop, which can be used with most SCADA systems or 3-wire bridge, 6 to 20mA current loop, or 6 to 20Vdc output.
Pressure Transducers are ideal for fluid flow measurement in a variety of applications. Capable of measuring pressures from vacuum to 300 psig (21 BAR), analog and 4 to 20 mA output types available, Proprietary sensing element for superior accuracy and higher pressure range, Rugged metal housing
The P499 series controller takes monitoring, controlling and alarming on-board petroleum systems to the next level. A new, high resolution display provides additional data logging capabilities, an easy to set up range switch interface eliminates the need for hose range switches, and has built-in Ethernet connectivity so you can monitor status remotely.
QUALITY THAT LASTS