SPST PRESSURE CONTROL 20 /100# ADJ
Universal controls 8528 is a single-throw (SPST) pressure control. Pressure controls are used to cause a specified change in supply pressure and flow rate when the pressure at the inlet port is less than the set point of the control. Place the 8528 1/4 inch flare nut connection to your plumbing system, then connect other components as shown.
The Johnson Controls 8528 is a single-pole, single-throw (SPST) pressure control designed for use with non-corrosive refrigerants. The 8528 features a maximum working pressure of 100 psi, a 36" capillary connection and a 1/4"-28 UNF unthreaded connection.
The RGS8528 pressure controller is a general-purpose, manually adjustable, non-corrosive refrigerant pressure control designed to improve process safety and equipment protection. Featuring a single pole/single throw (SPST) actuator and an electrically actuated pilot valve for automatic operation, the pilot operated pressure control can be manually adjusted to maintain a preset system pressure or flow rate.
The 8528 is a pressure control designed to operate at non-corrosive refrigerants. It is ideal for use where ozone depletion is of concern such as in solar heating applications.
An adjustable downstream pressure regulator with a maximum working pressure of 100psi. This non-corrosive refrigerant pressure control will reduce operating losses and maximize cooling capacity in air conditioning and refrigeration systems. It has a 36-inch capillary tube and features a stainless steel diaphragm, 3/4" barbed connection, 1/1/2" FPT outlet and a single pole, single throw output module.
Johnson Controls 8528 1/4" male flare, 100 psi differential single-throw on/off pressure switch is used as a compressor on/off valve to direct flow of clean refrigerants. The pressure switch has a 20# spring and 36" long (40") coiled capillary. The switch can handle 100 psi max working pressure.
The 8528 Series is a pneumatic pressure control with a manually operated snap-action switch. It has an all-metal, corrosion resistant body with a baked enamel finish and a glass faced dial for easy viewing. This control is the recommended control for continuous duty and intermittent service of refrigerants R-22 and R-404A.